Shop

DCE 5224AV-DSG 24-PORT VDSL2 / ADSL2+ DSLAM-0

DCE 5224AV-DSG 24-PORT VDSL2 / ADSL2+ DSLAM

$1,875.00

In stock

SKU: 5224AV-DSG Category:

Description

DCE 5224AV-DSG 24-Port VDSL2 / ADSL2+ with 2-Port Gigabit TP/SFP Combo IP DSLAM

 

     

 

Perfectly Designed for FTTx Last Mile Applications
DCE 5224AV-DSG is a telecom-level, high-performance IP-DSLAM (Digital Subscriber Line Access Multiplexer) with 24-port VDSL2 / ADSL2+ and 2-port Gigabit TP / SFP combo interfaces, and AC plus DC Redundant Power System. The 5224AV-DSG is fully compliant with ITU-T G.993.2 VDSL2 standard band plan up to profile 30a. It offers maximum download and upload line rate up to 100/100Mbps on the existing twisted pair lines. For ADSL connectivity, the 5224AV-DSG supports high interoperability and backward compatibility with ATU-R, and ADSL2 / ADSL2+ line mode. It is an ideal CO solution for FTTx last mile applications of broadband access by ISPs and Telecoms.

 

Delivering High-demand Service Connectivity for ISP/Triple Play Devices
The 5224AV-DSG provides excellent bandwidth to meet the requirement of the triple play devices for home entertainment and communications. With the capability of 100/100Mbps symmetric data transmission, the 5224AV-DSG enables many multi-media services to work on the Internet, such as VOD (Video on Demand), Voice over IP, Video phoneIPTV, Internet caching server, distance education, and so on.

ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the 5224AV-DSG supports transmission rates up to24Mbps downstream and 3.5Mbps upstream with ADSL 2+ technology. The 5224AV-DSG supports PPPoE relay to establish connection with ISP, and it is switched over to VDSL2 after the network upgrade.

Comprehensive and Advanced VDSL2/ADSL2+ Configuration
For the bandwidth and distance of broadband access, the 5224AV-DSG IP-DSLAM supports multiple selective VDSL2 profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a), 997/998 band plan and ADSL/ADSL2/ADSL2+ ITU-T G.993.1, ITU-T G.992.3, ITU-T G.992.5, Annex A/B/L/M transmit modes to each subscriber line. Furthermore, it can be configured on a per-link basis for transmission mode, rate limitation, INP (impulse noise protection) and SNR (signal-to-noise) margin. These advanced xDSL functionalities help service providers to adjust the line performance and build a stable and reliable IP-DSLAM solution.

Extremely-reliable Design to Ensure Continuous Operation
The 5224AV-DSG supports the SELT (Single-end Loop Testing) and dual power inputs system for continuous network operation. SELT simplifies the testing of a DSL loop from one end to the line to be completed easily from the central office (CO) without having to require a technician or any equipment to be employed at the subscriber site. SELT makes line maintenance easily and reduces device shutdown time. The 5224AV-DSG is also equipped with one 90~240V AC unit and one DC -48V power supply unit for power redundancy. The Redundant Power System offers more reliability and reduces the possibility of device shutdown. The -48V DC power supply implemented makes the 5224AV-DSG IP-DSLAM as a telecom level device that can be located at the electronic room.

 

 

 

High-speed Broadband Communications for Home Triple Play Application
Nowadays, higher speed home broadband connections are in great demand, but most of the last mile solutions in the market are not easily to be deployed or cost very much. The 5224AV-DSG will be the perfect solution to the last mile deployment for ISP and Telecom service providers as it applies the EoVDSL (Ethernet over VDSL) to providing up to 100Mbps speed transmission capability with the current telephone wire (RJ11), and thus it does not cost too much for re-wiring and can make many multi-media services come true. The 5224AV-DSG not only gives the excellent bandwidth for the triple-play home entertainment and communications, but also supports ADSL2 / ADSL2+ technology for users to conveniently utilize the current ADSL / ADSL2+ device.

 

 

 

VDSL2 in Hotel Deployment
The 5224AV-DSG can support the ISP and Telecom service providers in long-distance network deployment. By Ethernet standard, the length of cable can only reach up to 100 meters, and thus, the Ethernet network cannot meet the requirement when the deployment needs a longer cable. To solve this issue, the 5224AV-DSG complies with the VDSL2 / ADSL2+ standard where up to 1.4km in cable length through existing phone wires can be supported. Thus, in the Hotel network, for example, the IPTV, Internet and wireless facilities can be installed in each room even though the central office or control room is over 100 meters away.

 

 

 

 

 

DCE 5224AV-DSG Features 

DSL Interfaces

  • 24 full-duplex VDSL2 / ADSL2+ links via RJ21 (Telco-50) connector
  • 24 corresponding POTS lines via RJ21 (Telco-50) connector
  • Built-in POTS splitter for each VDSL / ADSL port
  • Compatible with PLANET’s VDSL2 CPE devices: VC-231, VC-234, VDR-300NU
  • Compatible with PLANET’s ADSL2/2+ router: ADN-4101, ADE-3400, ADE-3410, ADE-4400, VDR-300NU
  • Auto-speed function for DSL link (by distance and cable quality)

Ethernet Interfaces

  • 2 10/100/1000Mbps TP and 2 1000Mbps SFP shared combo interfaces
  • 1 alarm in and 1 alarm out copper ports
  • Auto-MDI/MDI-X detection on Gigabit RJ-45 port

VDSL2 Features

  • Cost-effective VDSL2 link and central management solution
  • Compliant with ITU-T G.993.2 VDSL2 standard (8a,8b,8c,8d,12a,12b,17a and 30a Profiles)
  • Configurable xDSL line profile and alarm profile
  • DMT (discrete multi-tone) line coding VDSL
  • Up to profile 30a 100/100Mbps symmetric data rate for VDSL2vSelectable target data rate and target SNR margin
  • Built-in surge protection against surge damage from high energy spike
  • Voice and data communication can be shared on the existing telephone wire simultaneously
  • Supports downstream / upstream rate control on each port

ADSL2/2+ Features

  • Compliant with ADSL2/2+ standard
  • – ITU-T G.992.1 Annex A/B- ITU-T G.992.3 Annex A/B, Annex L mode1 and mode2- ITU-T G.992.5 Annex A/B/M
  • Configurable xDSL line profile and alarm profile
  • Supports upstream 3.5Mbps and downstream 24Mbps at the maximum
  • Supports PPPoE relay

Layer 2 Features

  • Destination Lookup Fail (DLF) / Broadcast Rate Limit
  • Q-in-Q VLAN
  • Supports Redundancy / Static Link Aggregation / Daisy Chain uplink application mode
  • 8 queues priority for SP-priority and WRR-weight QoS
  • ToS to VLAN priority remark mapping

Quality of Service

  • 8 queues priority for all xDSL ports
  • SP-priority / WRR-weight QoS
  • ToS to VLAN priority remark mapping

Multicast

  • IGMP v2
  • IGMP Fast Leave

Security

  • 8 groups Layer2/3/4 Access Control List
  • DHCP Option82

Management

  • System date and time control
  • Single-end loop testing
  • Lamp test
  • User management account
  • Out-band management
  • Remote management control
  • SNMP trap

Power System

  • 90~240V AC and -48V DC dual power input interfaces
  • Supports power redundancy

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in