CALL US :+1 301-924-7400

8 Port Async Sharing Unit[SKU - 33]

8 Port Async Sharing Unit

8 Port Async Sharing Unit[SKU - 33]

$795.00
Quantity :
DESCRIPTION
The DCB Async Sharing Unit (ASU) shares a single port with 4, 8, 16, 24 or 32 others. Data received on the shared common port is broadcast to all the other ports. The ASU makes it easy to share async polling networks. The ASU can be used with terminal devices, multipoint modems, point-to-point modems, DSUs, over ISDN, or over frame relay. The ASU is the ideal product for this requirement. It supports async port speeds up to 38.4 kbps.

One method of selecting ports is using terminal device RTS/CTS RS-232 control leads. The ASU constantly scans all ports for Request to Send (RTS). When a terminal device asserts RTS, the RTS signal is passed from that port to the common shared port. On the common shared port, the RTS lead is passed out to the modem. The common shared port Clear to Send (CTS) response is passed back to the terminal that asserted RTS. The connected device will send data upon receiving CTS. After the terminal device completes its transmission and lowers RTS, the scanning resumes. In the RTS/CTS control mode, data from a port is discarded if RTS is not asserted.

The anti-streaming timer option for the ASU blocks transmission from a port if that port holds RTS on for more than 8 seconds. This is useful in systems that experience "hung" ports due to terminal device RTS or modem DCD staying on in error. Turning RTS off and back on or a reset of the ASU will reset the anti-streaming timer.

The combiner mode of the ASU is perfect for polled systems that do not have RTS/CTS control. For example, many RTUs used in SCADA and other control system environments are implemented with just three RS232 leads, transmit data, receive data and signal ground. The ASU may be used at the host end of a system, where the multiple ports are connected to line drivers, modems, DSUs, etc, and where the Carrier Detect (DCD) signal is constantly on, rather than switched. In these applications, the ASU combiner mode takes all data from the ports and passes that data to the network composite without RTS/CTS control. RTS is ignored in the combiner mode.

The ASU can be used at the remote locations where the common shared port connects to a modem, ISDN TA or DSU. The ASU can also be used at the host end of a network to share one host port with many modems, ISDN TAs or DSUs.


SPECIFICATIONS

General

  • Rates: Async port to 38.4 kbps (9.6 kbps default)
  • Application: Share one port with 4, 8, 16, 24 or 32 other asynchronous ports.
  • All ports are async RS-232
  • Supports data rates to 38.4 kbps

Indicators (front panel)

Power, Activity, Line Error, Modem Ready, Port 1 Setup, Loopback Activity indicates incoming or outgoing data. Line Error indicates an improper port speed. Modem Ready indicates DCD on the Network port.

Controls

Front panel push button for loopback RTS/CTS contention control or combiner mode, anti-streaming option Side door accessible firmware cartridge for installing firmware upgrades Setup via the "Port One Setup", activated by the front panel push-button, or setup rear panel setup port. Use to define port speeds, anti-streaming, etc.

Data Port

Interface: RS-232, V.24, speeds up to 38,400 bps
Connector: RJ-45 per EIA/TIA 561 pin outs

Physical/Electrical

Power requirements: 120 VAC, external supply, 220 VAC and DC supplies also available
8 and 16 channel units: 10 1/4 " x 9 3/4 " x 2 1/4 "
24 and 32 channel units: 10 1/4 " x 9 3/4 " x 4 1/2 "
One pound plus external power supply


Rear view of 16 port ASU

Application



ASU-04 4 Port ASU
ASU-08 8 Port ASU
ASU-16 16 Port ASU
ASU-24 24 Port ASU
ASU-32 32 Port ASU
RK-8/16 Rack mount for 8/16 port unit
RK-24/32 Rack mount for 24/32 port unit



Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search