Shop

RS422/RS232 Interface Converter, barrel,  passive-0

RS422/RS232 Interface Converter, barrel, passive

$69.00

In stock

SKU: 9802034 Category:

Description

DESCRIPTION

The DCB RS-422 to RS-232 interface converter is just 1.75″ long and 1″ in diameter. It is available in a line powered unit that is powered by +12 Vdc on pin 1 or powered by an external 120Vac wall-mount power supply. While designed for use with the DCB SR multiplexers, it is suitable for converting RS-422 to RS-232 with any manufacturers’ equipment. The DCB converter requires a plus DC voltage on pin one of the RS-232 connector to power the circuit. The unit will convert RS-232 to RS-422, RS-530, and V.35 (transmit and receive data only).

For more demanding applications, our industrial rated RS-422 to RS-232 converters may be more appropriate. They were designed to a wider temperature range, various power supply voltages, and include screw-down terminals. Information on those products is here.


Typical Application from DCB SR mux to an RS-422 terminal, showing pinouts:

RS-561 Interface Pin # RS-232 end of converter RS-422 end of converter
DSR 1 —–> 1 Positive 12Vdc voltage required, 5 – 10 ma.
(on line-powered unit)
1 n/c
DCD 2 2 n/c 2 n/c
Busy 3 3 n/c 3 OUTPUT Rx Data –
Sig Gnd 4 4 Sig Gnd 4 INPUT Tx Data +
Rx Data 5 —-> 5 Rx Data INPUT 5 INPUT Tx Data –
Tx Data 6 <--- 6 Tx Data OUTPUT 6 OUTPUT Rx Data +
CTS 7 n/c n/c
RTS 8 n/c n/c

“n/c” refers to “no connection”

The above arrows show the signal direction. Note that the RS-422 leads are balanced, with 2 OUTPUT wires (pin 3 is -, pin 6 is +), and 2 INPUT wires (pin 4 is +, pin 5 is -).

Pin 5 of the RS-232 side RJ-45 connector is data INPUT to the converter, Pin 6 of the RS-232 connector is data OUTPUT from the converter.


Typical application using a PC 9 pin serial port:

9 pin serial port RJ-45 connector at
RS-232 end of converter
RJ-45 connector at
RS-422 end of converter
4 – DTR -> 1 = +6 to +12 Volts DC required from RS-232 device unless DC adapter is used. Typical current is 9 ma. 1 – n/c
2 – n/c 2 – n/c
3 – n/c 3 OUT Rx Data –
5 – Signal Ground 4 – Signal Ground 4 IN<- Tx Data +>
3 – Rx Data -> 5 – Rx Data IN 5 IN<- Tx Data ->
2 – Tx Data <-> 6 – Tx Data OUT<-> 6 OUT Rx Data +
7 – n/c 7 – n/c
8 – n/c 8 – n/c

On the interface converter, the label reads “RS-232 to RS-422”. The end labeled “RS-232 ” is electrically RS-232. The end labeled “RS-422” is electrically RS-422.

Pin Numbering from the cable perspective Pin Numbering from the connector perspective

SPECIFICATIONS

Connectors
RJ45 version – Two RJ-45 modular 8-conductor jacks
1.75″ long, 1″ diameter
Txd and Rxd lines ONLY are converted, Control leads are not passed through the converter
Temperature range 0 to +70 C standard, -40 to +85 C Industrial model

9802034 RS-422 to RS-232 Interface Converter (powered from RS-232 lead)
9802044 RS-422 to RS-232 Interface Converter with 120VAC- DC adapter
9802045 RS-422 to RS-232 Interface Converter with 240VAC- DC adapter
9802059 RS-422 to RS-232 Interface Converter Rated -40 to +85C (powered from RS-232 lead)(/a)
9802057 RS-422 to RS-232 Interface Converter -40 to +85 C w/ 120 V Power adapter

Additional information

Weight 2 lbs
Dimensions 12 × 10 × 5 in