|
Features & Specifications
ADSL Compliance
Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN / U-R2
Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M) (BiPAC 7800(N)A only)
Compliant with ADSL2+ Standard
- G.dmt.bis plus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M) (BiPAC 7800(N)A only)
Network Protocols and Features
NAT, static routing and RIP-1 / 2
Universal Plug and Play (UPnP) Compliant
Dynamic Domain Name System (DDNS)
Virtual Server and DMZ
SNTP, DNS relay and IGMP proxy
IGMP snooping for video service
Management based-on IP protocol, port number and address
SMTP client with SSL/TLS
Firewall
Built-in NAT Firewall
Stateful Packet Inspection (SPI)
Prevents DoS attacks including Land Attack, Ping of Death, etc.
Remote access control for web base access
Packet Filtering - port, source IP address, destination IP address, MAC address
URL Content Filtering - string or domain name detection in URL string
MAC Filtering
Password protection for system management
VPN pass-through
Quality of Service Control*5
Supports the DiffServ approach
Traffic prioritization and bandwidth management based-on IP protocol, port number and address
ATM and PPP Protocols
ATM Adaptation Layer Type 5 (AAL5)
Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
Bridged or routed Ethernet encapsulation
VC and LLC based multiplexing
PPP over Ethernet (PPPoE)
PPP over ATM (RFC 2364)
Classical IP over ATM (RFC 1577)
MAC Encapsulated Routing (RFC 1483 MER)
OAM F4 / F5
IPTV Applications*2
IGMP Snooping
Virtual LAN (VLAN)
Quality of Service (QoS)*5
Wireless LAN (BiPAC 7800N)
Compliant with IEEE 802.11n, 802.11g and 802.11b standards
2.4 GHz - 2.484 GHz frequency range
Up to 300Mbps wireless operation rate
64 / 128 bits WEP supported for encryption
WPS (Wi-Fi Protected Setup) for easy setup
Wireless Security with WPA-PSK / WPA2-PSK support
WDS repeater function support
802.1x radius supported
WLAN on/off time schedule control
Management
Easy Sign-On (EZSO) and Auto-scan ADSL settings
Web-based GUI for remote and local management
Firmware upgrades and configuration data upload and download via web-based GUI
Embedded Telnet server for remote and local management
Available Syslog
Mail Alert for WAN IP Changed
Wake On LAN
Supports DHCP server / client / relay
TR-069*3 supports remote management
SNMP v1/v2/v3 *3 supports remote and local management
Hardware Specifications
Physical Interface
WLAN: 3 x 2dbi detachable antennas (BiPAC 7800N only)
DSL: ADSL port
EWAN: RJ-45 Ethernet port for connecting to ADSL / Cable / VDSL / Fiber modem device
Ethernet: 4-port 10 / 100 / 1000M auto-crossover (MDI / MDI-X) Switch
Factory default reset button
WPS push button (BiPAC 7800N only)
Power jack
Power switch
Physical Specifications
Dimensions: 9.04" x 6.10" x 1.69" (229.5mm x 155mm x 43mm)
Power Requirements
Input: 12V DC, 1.5A
Operating Environment
Operating temperature: 0 – 40°C
Storage temperature: -20 – 70°C
Humidity: 20 – 95% non-condensing
Models & Supported Standards
BiPAC 7800(N) A: Annex A and Annex M (Annex A and Annex M: ADSL over POTS)
BiPAC 7800(N) U: Annex B and U-R2 (Annex B and U-R2: ADSL over ISDN)
ADSL Compliance
Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN / U-R2
Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M) (BiPAC 7800(N)A only)
Compliant with ADSL2+ Standard
- G.dmt.bis plus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M) (BiPAC 7800(N)A only)
Network Protocols and Features
NAT, static routing and RIP-1 / 2
Universal Plug and Play (UPnP) Compliant
Dynamic Domain Name System (DDNS)
Virtual Server and DMZ
SNTP, DNS relay and IGMP proxy
IGMP snooping for video service
Management based-on IP protocol, port number and address
SMTP client with SSL/TLS
Firewall
Built-in NAT Firewall
Stateful Packet Inspection (SPI)
Prevents DoS attacks including Land Attack, Ping of Death, etc.
Remote access control for web base access
Packet Filtering - port, source IP address, destination IP address, MAC address
URL Content Filtering - string or domain name detection in URL string
MAC Filtering
Password protection for system management
VPN pass-through
Quality of Service Control*5
Supports the DiffServ approach
Traffic prioritization and bandwidth management based-on IP protocol, port number and address
ATM and PPP Protocols
ATM Adaptation Layer Type 5 (AAL5)
Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
Bridged or routed Ethernet encapsulation
VC and LLC based multiplexing
PPP over Ethernet (PPPoE)
PPP over ATM (RFC 2364)
Classical IP over ATM (RFC 1577)
MAC Encapsulated Routing (RFC 1483 MER)
OAM F4 / F5
IPTV Applications*2
IGMP Snooping
Virtual LAN (VLAN)
Quality of Service (QoS)*5
Wireless LAN (BiPAC 7800N)
Compliant with IEEE 802.11n, 802.11g and 802.11b standards
2.4 GHz - 2.484 GHz frequency range
Up to 300Mbps wireless operation rate
64 / 128 bits WEP supported for encryption
WPS (Wi-Fi Protected Setup) for easy setup
Wireless Security with WPA-PSK / WPA2-PSK support
WDS repeater function support
802.1x radius supported
WLAN on/off time schedule control
Management
Easy Sign-On (EZSO) and Auto-scan ADSL settings
Web-based GUI for remote and local management
Firmware upgrades and configuration data upload and download via web-based GUI
Embedded Telnet server for remote and local management
Available Syslog
Mail Alert for WAN IP Changed
Wake On LAN
Supports DHCP server / client / relay
TR-069*3 supports remote management
SNMP v1/v2/v3 *3 supports remote and local management
Hardware Specifications
Physical Interface
WLAN: 3 x 2dbi detachable antennas (BiPAC 7800N only)
DSL: ADSL port
EWAN: RJ-45 Ethernet port for connecting to ADSL / Cable / VDSL / Fiber modem device
Ethernet: 4-port 10 / 100 / 1000M auto-crossover (MDI / MDI-X) Switch
Factory default reset button
WPS push button (BiPAC 7800N only)
Power jack
Power switch
Physical Specifications
Dimensions: 9.04" x 6.10" x 1.69" (229.5mm x 155mm x 43mm)
Power Requirements
Input: 12V DC, 1.5A
Operating Environment
Operating temperature: 0 – 40°C
Storage temperature: -20 – 70°C
Humidity: 20 – 95% non-condensing
Models & Supported Standards
BiPAC 7800(N) A: Annex A and Annex M (Annex A and Annex M: ADSL over POTS)
BiPAC 7800(N) U: Annex B and U-R2 (Annex B and U-R2: ADSL over ISDN)
*Notes:
1. The router may require firmware modification for certain ADSL2 / 2+ / Annex M DSLAMs.
2. IPTV application may require subscribing to IPTV services from a Telco / ISP.
3. Either TR-069 or SNMP v1/v2/v3 can be available; but only upon request for Telco / ISP tender projects. The TR-069 and SNMP v1/v2/v3 software can only be applied to one device and will not work together on the same device.
4. Specifications in this datasheet are subject to change without prior notice.
|