Pony Express 14.4L Custom OEM Modem Modules V32bis, 14.4 Kbps LL Modem Module OEM Modem Series To service the growing need for efficient , reliable data communication in harsh in environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that con operate at 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from the state-of-the-art communication devices. The rapid move toward “intelligent” substations, where meters, relays, RTU’s, and SCADA units where the conveniences of standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing the PE2.4, PE9.6FPD, PE1.4, PE14.4L, PE202T, and PE28.8 OEM modems designed specifically for harsh environments. The PE OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, PE14.4, and PE28.8 OEM modems operate at full or half duplex on a dial line. The PE202T, PE14.4L, and PE9.6FPD OEM modems operate full or half duplex on a 2 or 4 wire leased lines. The PE OEM SPEC’s can be found in the MIU modems, MD cards, and the MIU Power Port modems. Features Modem Interface Units 5V logic (TTL) Simple send and receive signals 2400kbps 2-wire dial-up line modem 5V logic (TTL) power supply IEC801-4 surge protection -40˚C to +85˚C operating temperature For meters, relays, SCADA etc. Specifications PE2.4 Modem Line Speeds: asynchronous 2400, 1200, & 300bps Standards: V.22bis, V.22, Bell212A, Bell 103 Transmission Line: Dial-up Compatibility: Hayes Extended AT Command Set Power: 5V logic (TTL) PE9.6FPD Modem Line Speeds: asynchronous 4800, 9600, & 14000bps Standards: V.27 & V.29 Transmission Line: 2 & 4 wire leased line Compatibility: Hayes Extended AT Command Set Power: 5V logic (TTL) PE14.4 Modem Line Speeds: asynchronous 14000, 9600, 4800, 2400, 1200, & 300bps Standards: V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103 Transmission Line: Dial-up Compatibility: Hayes Extended AT Command Set Power: 5V logic (TTL) PE14.4L Modem Line Speeds: asynchronous 14000, 9600, 4800, 2400, 1200, & 300bps Standards: V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103 Transmission Line: 2 & 4 wire leased line Compatibility: Hayes Extended AT Command Set Power: 5V logic (TTL) PE202T Modem Line Speeds: 0-1200bps Standards: Bell 202T Transmission Line: 2 & 4 wire leased line or private line Compatibility: Hayes Extended AT Command Set Power: 5V logic (TTL) PE28.8 Modem Line Speeds: asynchronous 28800, 14400, 9600, 4800, 2400, 1200, & 300bps Standards: V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103 Transmission Line: Dial-up Compatibility: Hayes Extended AT Command Set Power: 5V logic (TTL) General Specs Card size: 3.4” x 0.01” x 0.5” Digital port: DTE 8-pin, simple send/receive signals Analog port: RJ11 modular jack Surge protection (power line): 8kV (exceeds IEC801-4) (20kV [IE801-5] available if required) Surge protection (analog line): 5kVAC Environment: -40˚C to +85˚C, 0-95% humidity (non-condensing) Certificates: FCC part 68, industry Canada Ordering Information DCE/PE2.4 2-wire dial-up PCB DCE/PE9.6FPD 2 & 4-wire leased line PCB DCE/PE14.4 2-wire dial-up PCB DCE/PE14.4L and 4-wire leased line PCB DCE/PE202T 4-wire leased or private line PCB DCE/PE28.8 2-wire dial-up PCB