DATA CONNECT 5204V BRIDGE MODEM 4-PORT VDSL2+ 30a The Data Connect 5204V-BM is a four port high speed 100/100Mbps Downstream / Upstream, over VDSL2 solution. The DCE 5204V-BM is designed based on two core networking technology, Ethernet and the latest Very-high-data-rate Digital Subscriber Line. Our technology offers the absolute fastest data transmission speed over existing copper telephone lines without the need of rewiring. The DCE 5204V-BM supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 384ft and 50/2Mbps for 4,593ft long range connections. The Data Connect 5204V-BM functions over existing telephone copper wires. In addition the DCE 5204V-BM is a Long Reach Ethernet (LRE) extender providing four RJ-45 Ethernet port and one RJ-11 phone jack for VDSL2 connection. By using the additional Splitters from the DCE 5204V-BM-2PK (two pack), the splitter can allow POTS and Ethernet to share the existing phone line; therefore, there is no need to replace existing copper wiring. Just plug the DCE 5204V-BM with an additional splitter into the existing RJ-11 telephone jack and a high-performance Ethernet extender network can be connected. The DCE 5204V-BM is ideal to be used as an Ethernet extender to an existing Ethernet network. The Data Connect 5204V-BM can deliver High-Demand service connectivity for ISP Triple Play devices. The DCE 5204V-BM provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the DCE 5204V-BM enables many Multi-Media services to work on local Internet services, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and many more. The Data Connect 5204V-BM is a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be easily viewed via the diagnostic LEDs on the front panel. The DCE 5204V-BM offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be selected by using a built-in DIP switch. In a point-to-point configuration, there must be a CPE mode on one side and a CO mode on the other side to perform a seamless Ethernet connection. The Data Connect 5204V-BM features a symmetric Band-Plan for the transmission of upstream and downstream signals. The band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. When the DCE 5204V-BM is in profile 17a operation mode, it provides long distance Ethernet transmission with ultra high performance to the telephone line network. When the DCE 5204V-BM is in 30a operation mode, it provides short distance Ethernet transmission with higher speed performance in upstream and downstream traffic SPECIFICATIONS PORTS 10/100BASE-TX - 4 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X VDSL - 1 RJ11, Female Phone Jack PHONE - Additional Splitter for POTS Connection DIP SWITCH & FUNCTIONALITY 4-Position DIP Switch CO / CPE Mode Select Selectable Fast and Interleaved Mode Selectable Target 17A / 30A Profiles Selectable Target SNR Mode ENCODING VDSL-DMT ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T 993.2 VDSL2 (Profile 17a/30a Support) LED INDICATORS One Power Three for RJ-11/VDSL2 Two for each RJ-45 10/100Base-TX port CABLING Ethernet – 10Base-T: 2-Pair UTP Cat.3, 4, & 5 up to 100m (328ft) - 100 Base-T: 2-Pair UTP Cat. 5 up to 100m (328ft) VDSL – Twisted-Pair telephone wires (=> AWG24) up to 1.4km POWER Requirement – 5VDC, 2A Consumption – 66.6 Watts / 22 BTU DIMENSION (W x D x H) – 97x70x26mm, 3-13/16x2-3/4x1 (inches) WEIGHT – 199grams, 44lbs. ENVIRONMENT Temperature – Operating: 0 to 50 Degrees Celsius -Storage: -10 to 70 Degrees Celsius Relative Humidity – Operating: 10 to 90% (non-condensing) -Storage: 10 to 90% (non-condensing) SWITCH SPECIFICATIONS Switch Processing Scheme – Store-and-Forward Address Table – 1K Entries Flow Control – Back Pressure for Half Duplex, IEEE 802.3x -Pause Frame for Full Duplex SWITCH FABRIC – 0.2Gbps THROUGHPUT (Packet per Second) – 0.14Mbps NETWORK CABLES 10/100Base-TX 2-Pair UTP Cat. 3, 4, 5 (100meters, max.) EIA/TIA-568, 100-Ohm STP (100meters, max.) REGULATORY COMPLIANCE FCC Part 15 Class A CE STANDARDS COMPLIANCE IEEE 802.3 10Base-T IEEE 802.3U 100Base-TX ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T 993.2 VDSL2 (Profile 17a/30a Support) ORDERING INFORMATION DCE/5204V-BM -2PK VDSL2 4-Port Bridge Modem 2-Pack DCE/5204V-BM VDSL2 4-Port Bridge Modem DCE/5204V-BM-RM VDSL2 4-Port Bridge Rack mount Modem