DATA IG336S-HV V.34 33.6KBPS STANDALONE DIAL SECURITY MODEM -HIGH VOLTAGE The Data Connect DCE/IG336S high-speed V.34bis security dial-line modems are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN) with security features such as password log-in and security call-back. The DCE/IG336S utilizes the industries latest V.34bis modem technology to deliver outstanding features, performance and reliability in one cost-effective solution. The DCE/IG336S modem are ideally suited for industrial communication applications including SCADA systems, RT’s, traffic monitor and control, and industrial automation network. The DCE/IG336S supports RTUs equipped with an EIA RS-232 or RS-485 serial port. Data communications speed up to 33.6 kbps are supported. The modems incorporate the latest data-compression and error-correction standards for improved data transmission and reception over marginal and poor-quality telephone lines. Multiple levels of security with password verification and security call back keep your valuable data secure from intruders. The DCE/IG336S modems are powered by a wide range of AC and DC power supply voltages. Its low consumption and low stand-by current technology design makes the DCE/IG366S is ideal for battery-powered system as well as regular AC powered operations. FEATURES Worldwide Operation Support: -ITU-T V.34bis/V.34/V.32bis/V.32 -ITU-T V.22bis/V.22/V.23/V.23/V.21 -Bell 212A/Bell 103 -V29 FastPOS -V.22bis fast connect -V.44/V.42bis/MNP 2 -V.42/MNP 2/MNP 4 Security Options: -password log-in -Security call-back DTE/ Host Interface EIA RS-232 and RS-485 Embedded AT command set Sixty-three embedded and upgradable country profiles for worldwide homologation NVRAM for configuration and country profile storage Built-in remote diagnostics and configuration management Heavy-duty surge protection provided at power supply and phone line interface Supports wide range of AC and DC power supply options Supports DC power supplied from DTE or DB-9 connector Wide range of operating temperatures Optional mounting kits for DIN Rail mounting or wall mount SPECIFICATIONS Data Rate Support Data modem ITU-T V.34bis: Up to 33.6kbps V.34: Up to 28800 bps V.32bis/V.32: Up to 14400 bps V.22bis: Up to 2400 bps V.21: 0-300 bps Bell 212A: 1200 bps Bell 103: 0-300 bops Fax modem Send and receive fax up to 14.4 kbps V17, V29, V27ter, and V21 channel 2 EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2 Data Format Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11-bits character with 1 or 2 stop bits Modulation Fully compatible with ITU-T V.34bis/V.34/V.32bis/ V.22bis/V.21 Bell 212A and Bell 103 compatible modes. Transmission Line Interface 2-wire full duplex over PSTN Connector: RJ-11C DTE/RTU Interface The modem provide serial ports to support RS-232 or RS-485 (selectable) interface standards: RS-232 Interface Connector: DB9-F Signal: RTS, CTS CD, TD, RD, DT, DSR, RI RS-485 Interface Connector: RJ-11C Signals: 4-wire full-duplex or 2-wire half-duplex TX+, TX-, RX+, and RX- Front Panel Indicators LED. Indicators: DTR, TXD, RXD, DCD, DSR, RI Security Options Password Log-in Security call-back Power Supply Three models support various power options: Standalone: 90-264VAC Standalone 100-400VDC Standalone 10-48 VDC Power Consumption: Idle mode: 65 mA@12V, 0.78 watts Normal mode: 75 mA@12V, 0.9 watts typical Mechanical Enclosure dimensions: 4.1”(W) x 5.0”(L) x 1.3”(H) 104mm(W) x 127mm(L) x 33mm(H) Weight: 0.5 pound, without AC power module Environment Temperature: Operation: -40ᵒC to + 85ᵒC Storage: -40ᵒC to + 85ᵒC Humidity: Up to 95% non-condensing Dry Contact Detection (optional) Two optical isolated dry contact detections are provided for external devices (consult factory for additional information). ORDERING INFORMATION DCE/IG336S Standalone with AC power module, 90-264VAC DCE/IG336DC Standalone, DC power, 10-48 VDC DCE/IG336-HV Standalone with AC power module, 90-264VAC or 100-400VDC DCE/IG202T-DIN DCE EN2 Din Rail Kit