The Data Connect ANS209FT (ST Connector; Multi-mode) is a Unmanaged 8-Port Industrial Ethernet(10/100Base-TX) to Fiber Optics(100Base-FX) converter that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 2 Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The Data Connect ANS209FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125ìm fiber cables; in half duplex mode, range is 412m with 62.5/ 125ìm fiber cables. The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function. Automatic MDI / MDI-X crossover for plug-and-play Each port supports both 10/100 Mbps speed auto negotiation Store-and-forward architecture Full duplex IEEE 802.3x and half duplex backpressure flow control 3.2 Gbps high performance memory bandwidth Integrated look-up engine with dedicated 1 K unicast MAC addresses. Supports +10~+30Vdc voltage Supports operating temperatures from -10 ~ +70°C DIN rail mount for industrial usage Technology Standards IEEE802.3, 802.3u, 802.3x Processing Type Store & forward wire speed switching - no delays MAC Addresses 1024 Memory Bandwidth 3.2 Gbps Flow Control IEEE802.3x flow control, back pressure flow control Interface RJ45 port 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection Fiber Optic port 100 Base-FX(Multi-mode; ST connector) LED Indicators 10/100M, Link/Act, Full duplex/Half duplex(Fiber Port) Ethernet Isolation 1500 Vrms 1 minute Frame Ground for EMS Protection Yes Fiber Optic Multi mode fiber cables:50/125, 62.5/125 or 100/140 ìm Distance :2 km, (62.5/125 ìm recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output:- 20 dBm Max. TX Output: -14 dBm RX Sensitivity: -34 to -31 dBm Ethernet Transmission distance Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm Power Input Voltage Range +10 ~ +30VDC (Non-isolation) Power consumption 0.17A@24VDC, +/- 5% arrowed with 100M Full duplex LED Indicator Yes Protection Power reverse polarity protection Frame Ground for EMS Protection Yes Connection 5-Pin Removable Terminal Block Mechanical Case Plastic Flammability UL 94V-0 Dimensions 64mm x 110mm x 98mm (W x H x D) Installation DIN rail mount Environmental Operating Temperature 0 ~ +70°C Storage Temperature -20 ~ +85°C Ambient Relative Humidity 10% to 90% non-condensing