The EX35000 series Ethernet switches are designed to operate in industrial field environments at the edge of the network. Whether on the factory floor or the control room, the EX35000 will provide flawless communications when you most need it. The EX35000 is a switch with the flexibility of eight Gigabit Ethernet ports that may be configured in various combinations of copper and fiber optic interfaces. It provides six 10/100/1000Base-TX copper ports plus two Gigabit combo ports. This Gigabit combo port means that customers can choose to use either 1000Base-SX/LX interface or 10/100/1000Base-TX interface according to their need. The switch gives priority to the port that is connected or to the optical port if both are connected. Flexibility is the main feature of the EX35000, it may be DIN rail, panel mounted and comes with power options to match the applications that require a tough, environmentally hardened Ethernet switch. FEATURES -Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment. -8192 MAC addresses -1.125M bits buffer memory -Supports jumbo frame up to 9KB -1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX -Full wire-speed forwarding rate 1-31 -Alarms for power failure by relay output -Redundant power inputs with Terminal Block and DC Jack --20°C to 60°C (-4°F to 140°F) operating temperature range -Hardened aluminum case -Supports DIN-Rail,Panel Mounted installation ORDERING INFORMATION EX35080-00Z 8-port 10/100/1000Base-TX Industrial Unmanaged Ethernet Switch EX35081-0YZ 7-port 10/100/1000Base-TX +1-port combo Gigabit Industrial Unmanaged Ethernet Switch EX35082-0YZ 6-port 10/100/1000Base-TX +2-port combo Gigabit Industrial Unmanaged Ethernet Switch Gigabit Options: (Y)= 3 : 1000Base-SX (SC) A : 1000Base-LX (SC) 10Km B : 1000Base-LX (SC) 20Km R : 1000Base-LX (SC) WDM RX:1310nm/RX:1550nm-20Km S : 1000Base-LX (SC) WDM RX:1550nm/RX:1310nm-20Km *More Gigabit Fiber options also available upon request. Power Input Interface: (Z)= B : Terminal Block & DC Jack Power Supply: (Optional) *Option A - The Terminal Block type external power supply are not included. Please order the following part numbers, as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5 **Option B - The external power adapter and power cord are not included. Please order the following part numbers, as required: 41-136044-X X=1,2,3,4,5 *See page 4-5 to 4-9 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter) Installation Type: DIN Rail (mounting kit is included) Optional Panel mount kit, ordered separately, part number: KP-AA96-480 SPECIFICATIONS: Technology Standards: IEEE802.3 10Base-T, 802.3u 100Base -TX/FX, 802.3ab 1000Base-T, 802.3z 1000Base-SX/LX IEEE802.3 x Flow Control:Flow control for full-duplex IEEE802.1p Queue Priority:Support four priority Queues Forward and Filtering Rate: 14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps Packet Buffer Memory: 1.125M bits Processing Type: Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control Address Table Size: 8192 MAC addresses Latency: 64 Bytes packet length less than 2.9ìs 1518 Bytes packet length less than 7.9ìs Power Input: Input Voltage: 12 to 32VDC (Terminal Block); 12VDC (DC Jack) Power Consumption: 7.2W Max. 0.6A@12VDC, 0.3A@24VDC Power Supply References: Terminal Block: 12 to 24VDC, 1.5A DC Jack: 12VDC, 3A Overload Current Protection: Present Reverse Polarity Protection: Present Mechanical Casing: Aluminum case IP20 Dimensions: 58mm (W) x 110mm (D) x 135mm (H) (2.29" (W) x 4.33" (D) x 5.31" (H)) Weight: 0.8Kg (1.761lbs.) Installation: DIN-Rail, Panel Mounting Interface Ethernet Port: Gigabit: 8 ports (2 Fiber combo ports included) LED Indicators: Per Unit: Power Status (Power 1, Power 2, Power 3) Per Port: Link/Activity (Green:10/100Mbps, Orange:1000Mbps) Alarm Contact: One relay output with current 1A @ 24VDC Environment Operating Temperature: -20°C to 60°C (-4°F to 140°F) Storage Temperature: -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity: 5% to 95% (non-condensing) Regulatory Approvals: ISO: Manufactured in an ISO9001 facility Safety: UL508, EN60950-1, IEC60950-1 EMI: FCC Part 15, Class A EN61000-6-3 EN55022 EN61000-3-2 EN61000-3-3 EMS: EN61000-6-2 EN61000-4-2 (ESD Standards) Contact: + / - 4KV; Criteria B Air: + / - 8KV; Criteria B EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM Criteria A EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV; Criteria B D.C. Power Ports: + / - 4KV; Criteria B A.C. Power Ports: + / - 4KV; Criteria B EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line; Criteria B D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B A.C. Power Ports: + / - 2KV; Line-to-earth; Criteria B EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz; Criteria A EN61000-4-11 (Voltage Dip Standards) A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B Environmental Test Compliance: IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.)