The WANsuite® 5130 provides T1 / FT1 termination with a variety of integrated features such as TDM, Frame Relay, and IP Gateway. The unit's built-in Frame Relay test set saves time and money on installation. All these features come with the intelligence of Verso / Verilink’s Service Aware technology. This technology gives WANsuite the intelligence to provide network visibility up to Layer 3. Features such as Top Talkers allow network administrators to determine bandwidth requirements and plan for the growth of their networks. WANsuite’s intelligence is further enhanced by optional NetVoyantTM element management software. The flexibility and power of this unit make it a one-stop solution for cost-conscious network administrators. Highlights T1 WAN access device/IP router TDM, Frame Relay, PPP IP router enables IP packet routing In-line T1 probe capabilities WANsight™ Web-server interface for remote access with password lockout Supports DHCP server and client NAT/NAPT PPP-NAPT for secure, flexible IP configuration Built-in service aware technology for real-time measurement of bandwidth utilization, network delay and verifying SLAs Supports SNMPv.2 with email notification Supports up to 128 DLCIs Autolearn DSOs on a T1 circuit WANsuite 5130 T1 / FT1 CSU/DSU, Router Network: 1, Data: 1 Software-selectable PART NUMBER AND DESCRIPTION 1100003: WANsuite 5130 AC power Cables and accessories included with unit: 9-1544-619-009: RJ-48/RJ-48 Pin to Pin, 9 ft 33-00221: DB-9M to DB-9F, 6 ft SERIAL INTERFACE DTE Port: Software-selectable V.35, EIA-530, RS-232 Data Rate: Sync: 1200 - 115200 bps and Nx64 (N=1 to 24); Async: 1200 - 115200 bps Connection: DB-25 female NETWORK INTERFACE Line Rate: 1.544 Mbps (± 50 bps) Data Rate: Nx56/64 kbps to 1.536 Mbps, where N=1 to 24 DSOs Line Code: AMI or B8ZS Line Framing: D4 or ESF Protocol: TDM, Frame Relay, PPP Connection: RJ-48C jack, 100 ohms ± 5% Input Signal: DS1, +1 to -27 dB (ALBO) Output Signal: 3.0 V Mode: Long-haul (T1), short-haul (DSX) DSX-1 Level: 0-110, 111-220, 221-330, 331-440, 441- 550, 551-660, >661 ft Line Build Out: 0, -7.5, -15, -22.5 dB Line Protection: 1000 V protection, fused input and output per GR 1089 Jitter Control: per TR 62411 and T1.403 ETHERNET INTERFACE Connection: 8-pin modular Compatibility: 10/100 Base-T, Autosensing Protocols: RIP1, RIP2, OSPF, TCP/IP, un-numbered ADVANCED FEATURES NAT/NAPT. PPP/NAPT DHCP server/client TCP server IP Host Access List MANAGEMENT INTERFACE WANsight (embedded Web-server interface), VT100, Telnet, SNMPv.2, local supervisory port, Ethernet port INDUSTRY LISTINGS FCC Compliance: Part 15 Subpart B, Class A, Part 68 US Safety: UL 1950 3rd Edition Canadian Safety: CSA C22.2 No. 950-95 Industry Canada: CS-03, Issue 8 BellCore: GR-1089-Core Part 3 DIAGNOSTICS Performance: 15-min, 24-hr, and 30-day monitoring (sampled every second) Email notification Originate Ping Network Loops: Line, Payload, or Maintenance DTE Port Loops: V.54 and Local BERT: Marks, QRSS, 511, 2047, 215, and Spaces T1 Performance Statistics: ES, SES, LOSS, UAS, CSS, BPVS, OOFS,AISS, RAS TIMING Network 1, Network 2, Internal, Serial 1, Serial 2 POWER REQUIREMENTS Power: AC 100-240 V / DC 18-150 V auto-ranging MECHANICAL Mounting: Desktop, rack, or wall Dimensions: 11.75 in. (29.8 cm) W, 1.86 in. (4.7 cm) H, 8.75 in. (22.2 cm) D Weight: 2.1 lb (0.97 kg) ENVIRONMENTAL Operating Temperature: 0 to 50 ºC (32 to 122 ºF) Storage Temperature: -20 to 65 ºC (-4 to 149 ºF) Humidity: 95% maximum, non-condensing Verso / Verilink’S SERVICE AWARE TECHNOLOGY Layer 3 Statistics and Up: IP, PPP, TCP, UDP, FTP, TFTP, SNMP, RIP1, RIP2, BootP, SMTP, HTTP, ICMP, OSPF, L2TP, H.323 Peak and Average Throughput on Up to 10 User Definable Filters: DLCI, IP address, or IP port number Top talkers VERIFY SERVICE LEVEL AGREEMENTS (FRF.13) Frame delivery ratio Data delivery ratio Round trip delay Service availability in seconds WARRANTY AND SUPPORT Five-year warranty