Shop

DATA CONNECT D4-4FXS-12FXO CHANNEL BANK-0

DATA CONNECT D4-4FXS-12FXO CHANNEL BANK

$1,458.00

In stock

SKU: D4-4FXS-12FXO Category:

Description

Data Connect Enterprise T1 Channel Bank FXS/FXO with Data

Providing reliable, flexible, and leading-edge solutions for a demanding industry.

Managing your telecommunication needs has never been easier than with DCE products. Data Connect Enterprise provides a flexible and reliable product line that can satisfy any T1 need. Our products will beat your expectations!

Unique DCE features like real-time T1 status on our four line by 40 character (4×40) LCD display, or our automatic, hands-off Auto T1 configuration tool utilizing artificial intelligence software, and the crystal clear audio quality proves that DCE products are in a class of their own.

Knowing that the DCE product comes ready to perform means that you can spend more time developing important customer relationships.

Data Connect Enterprise offers you a complete line of low cost T1 channel banks including FXS, FXO, or mixed mode FXS/FXO analog interfaces. As a bonus, every system comes with our standard fractional V.35 data port. Add the DCE modular, universal internal power supply system to the list, and DCE crushes the competition. There just isn’t a more flexible, feature rich channel bank available anywhere in the world (at any price) that compares to DCE.

DCE products are tough. In the rare case of trouble, our technical support staff is ready to give you the support you need, when you need it. Our 5-year limited warranty means that you can be confident that DCE will always work hard and work well in your T1 application.

FXS, FXO, and Modular
FXS – The DCE FXS analog interface provides standard battery and ringing voltages to each of up to 24 loop or ground start analog channels.

Each channel provides:
Digital DSP
Line current limit from 18ma to 45mA
Tx and Rx gain control of -5db to +6db
Power down control from 1 to 3 secs.
Ring cadence control

FXO – The DCE FXO analog interface requires a standard POTs analog telephone line up to 24 inputs

Each channel provides:
Digital DSP
Tx and Rx gain control of -15db to +12db
Ring cadence monitoring timer

FXS/FXO Modules – The DCE modular channel bank model allows for installation of either a 4-channel FXS or FXO analog daughter card. If the four slots are to be used as data, there is no need to install an analog card.

T1 CSU
All DCE channel banks feature a single CSU that is software controlled, software programmable and will self configure to the proper mode right out of the box.

Analog Interfaces
The DCE channel bank provides either FXS or FXO analog interfaces, both with digital technology that utilizes a dedicated Digital Signal Processor (DSP) for monitoring real-time line characteristics.

Power Input
All DCE channel banks come in 110VAC,/220VAC with -48V DC input. The only difference between the 110V model and the 220V model is the included power supply cord. All DCE CB24 models are identical.

What Comes in the Box?
DCE Channel Bank
110V or 220V power cord
5 foot RJ21 male-to-male cable
5 foot T1 straight cable
5 foot T1 cross over cable
19″, 23″ or wall mount brackets (ears)
Rack mounting hardware
Documentation CDROM

Standard Features
Asterisk soft PBX tested and ready!

4×40 LCD real-time status display shows independent AB bit signaling

Automatic T1 configuration using artificial intelligence software, no configuration switches

CSU auto detects T1modes: D4 or ESF, AMI or B8ZS

T1 CSU via RJ48C, with line buildout programmability

Internal power supply module, no external components

FLASH based system configuration

V.35 fractional data interface, user selectable to 56K or 64K

Self diagnostics, verbose error reporting, loopback modes

Single channel configuration, each channel may have a different analog start mode, signaling protocol, line current, or gain

Telco network uptime and downtime T1 history

Remote connection via RS-232c or Ethernet (optional) via Windows based graphical user interface

Field software upgradable

19, 23 or wall mounting kit standard

7 ft T1 and T1 crossover cable (for Asterisk installs), 25 pair analog cable and a 110 or 220 power cable included.

Immediate, Wink, Loop, Ground, RevPol, and three DID start protocols

Distinctive ring in Loop start mode

Caller ID enabled in Loop start mode

Low cost fully populated FXS, fully populated FXO, or modular FXS/FXO mixed mode capable

110V AC, 220V AC and -48V DC – all three standard

5-year limited warranty

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in