Pony Express 14.4L Custom OEM Modem Modules

V32bis, 14.4 Kbps LL Modem Module
OEM Modem Series
To service the growing need for efficient , reliable data communication in harsh in environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that con operate at 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from the state-of-the-art communication devices. The rapid move toward “intelligent” substations, where meters, relays, RTU’s, and SCADA units where the conveniences of standalone modem is unacceptable.
Data Connect Enterprise has addressed this problem by developing the PE2.4, PE9.6FPD, PE1.4, PE14.4L, PE202T, and PE28.8 OEM modems designed specifically for harsh environments.
The PE OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, PE14.4, and PE28.8 OEM modems operate at full or half duplex on a dial line. The PE202T, PE14.4L, and PE9.6FPD OEM modems operate full or half duplex on a 2 or 4 wire leased lines.
The PE OEM SPEC’s can be found in the MIU modems, MD cards, and the MIU Power Port modems.
Features
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
2400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40˚C to +85˚C operating temperature
For meters, relays, SCADA etc.
Specifications
PE2.4
Modem Line Speeds:
asynchronous 2400, 1200, & 300bps
Standards:
V.22bis, V.22, Bell212A, Bell 103
Transmission Line:
Dial-up
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
PE9.6FPD
Modem Line Speeds:
asynchronous 4800, 9600, & 14000bps
Standards:
V.27 & V.29
Transmission Line:
2 & 4 wire leased line
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
PE14.4
Modem Line Speeds:
asynchronous 14000, 9600, 4800, 2400, 1200, & 300bps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103
Transmission Line:
Dial-up
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
PE14.4L
Modem Line Speeds:
asynchronous 14000, 9600, 4800, 2400, 1200, & 300bps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103
Transmission Line:
2 & 4 wire leased line
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
PE202T
Modem Line Speeds:
0-1200bps
Standards:
Bell 202T
Transmission Line:
2 & 4 wire leased line or private line
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
PE28.8
Modem Line Speeds:
asynchronous 28800, 14400, 9600, 4800, 2400, 1200, & 300bps
Standards:
V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103
Transmission Line:
Dial-up
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
General Specs
Card size:
3.4” x 0.01” x 0.5”
Digital port:
DTE 8-pin, simple send/receive signals
Analog port:
RJ11 modular jack
Surge protection (power line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)
Surge protection (analog line):
5kVAC
Environment:
-40˚C to +85˚C, 0-95% humidity (non-condensing)
Certificates:
FCC part 68, industry Canada
Ordering Information
DCE/PE2.4 2-wire dial-up PCB
DCE/PE9.6FPD 2 & 4-wire leased line PCB
DCE/PE14.4 2-wire dial-up PCB
DCE/PE14.4L and 4-wire leased line PCB
DCE/PE202T 4-wire leased or private line PCB
DCE/PE28.8 2-wire dial-up PCB