Shop

DCE 5201V-BM High Speed VDSL2 Ehternet Extender 2-Pack-0

DCE 5201V-BM High Speed VDSL2 Ehternet Extender 2-Pack

$245.00

In stock

SKU: 5201V-BM-2PK Category:

Description

DCE 5201V-BM High Speed VDSL2 Ethernet Extenders / Bridge Modems (Profile 8a, 17a, 30a) 2-Pack with 2-Year Warranty

When ordering from this page you will
receive a pair (2 units) of DCE 5201V-BM VDSL2 Bridge Modems, perfect for
Point-to-Point bridge applications.

DCE 5201V-BM Speed
VDSL2 Bridge Modem

100/100Mbps Downstream / upstream, high Performance Ethernet
over VDSL Solution

The DCE 5201V-BM is an Ethernet-over-VDSL2 Converter with high
performance. It is designed based on two core networking technology, Ethernet and
VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2
technology offers absolutely fastest data transmission speed over existing
copper telephone lines without the need of rewiring. The 5201V-BM supports
ultra-high performance to the pervasive telephone line network with up to
100/100Mbps symmetric data rate within 300m and 50/2Mbps for 4,593 Feet (1.4km) long
range connections.

Implement with Existing Telephone Copper Wires
The 5201V-BM is also a Long Reach Ethernet (LRE) converter providing
one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2
connection. By using the additional Splitter from package of DCE/5201V-BM, the
splitter can provide POTS splitter to share the existing phone line with
POTS; therefore it is no need of replacing the existing copper wiring. Just
plug the DCE 5201V-BM with additional splitter into the existing RJ-11 telephone
jack and a high-performance VDSL2 network can be connected. The DCE 5201V-BM is
ideal to be used as an Ethernet extender to an existing Ethernet network.

Delivers High-Demand Service Connectivity for ISP / Triple Play
Devices

The DCE/5201V-BM provides excellent bandwidth to satisfy the triple play devices
for home entertainment and communication. With the capability of 100/100Mbps
symmetric data transmission, the 5201V-BM enables many Multi-Media services to
work on local Internet, such as VOD (Video on Demand), Voice over
IP
, Video phone, IPTV, Internet caching server, distance
education, and so on.

Easy & Flexible Installation
The Ethernet-over-VDSL2 Converter is plug-and-play design and fully
compatible with all kinds of network protocols. Moreover, the operating
status of each individual port and the whole system can be watched via the
rich diagnostic LEDs on the front panel. The 5201V-BM offers two modes, CPE
and CO, for application: CPE mode is used at client side and CO mode
is at central side. The CPE or CO mode can be adjusted by using a built-in
DIP switch. For point-to-point connection, a CPE mode DCE/5201V-BM and a CO mode
DCE/5201V-BM must be setup as one pair of converters to perform the connection.

Provides Superior Upstream and Downstream Transmission Performance
The 5201V-BM also defines symmetric band plan for the transmission of upstream
and downstream signals, the band plan performs higher transmission quality
in short range for central side (CO) in symmetric mode. In all, when the
DCE 5201V-BM is in profile 17a operation mode, it provides long distance transmit
with Ultra-high performance to the pervasive telephone line network, and
when the DCE/5201V-BM is in 30a operation mode, it gives short distance transmits
with upstream and downstream transmission giving wire speed performance.

Example Applications

Ethernet Distance Extension

A pair of DCE 5201V-BM
in a Point-to-Point application is
perfect for an Ethernet distance extender extension over
existing telephone wires. With just one pair
of AWG-24 copper wire, you can easily
connect two Ethernet networks together with
a maximum data rate of 100/100Mbps. With
the included splitter, the telephone
service can still be used while the 5201V-BM
CO/CPE is in operation. The solution
applications displayed below are typical applications for
the DCE 5201V-BM high speed VDSL2 Bridge
Modem.

MTU / MDU / Hospitality Solution

The DCE/5201V-BM is a perfect solution to quickly provide cost-effective yet
high speed network services to multi-unit buildings such as residential
buildings (multi-dwelling units), commercial (multi-tenant units)
buildings, hotels or hospitals. By utilizing the existing telephony
infrastructure, network installation is straightforward and requires no
new wiring. With up to 100/100Mbps transmission, Video on Demand, IP
telephony and various broadband services can be easily provided.


Last Mile of FTTx Deployment

The DCE 5201V-BM is an ideal solution for FTTx (Fiber to the Building, Fiber
to the Campus or Fiber to the Node) applications. It supports high
bandwidth VDSL2 over existing telephone wires in the “last mile”
from the ISP / Telecom / Service provider’s fiber node to the buildings
and customers’ houses. The 10/100Mbps port of DCE 5201V-BM can be directly
connected to a PC or to Ethernet devices such as Ethernet Switches or
Broadband Routers. It is excellent for phone line network built under
Internet because every room or house could use the existing phone line
to transmit data through the Internet and the whole building could share
the Internet to the wider area network with minimum cost.

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in