CALL US :+1 301-924-7400

DCE 5224V-DSGFP-48[SKU - 720]

DCE 5224V-DSGFP-48

DCE 5224V-DSGFP-48[SKU - 720]

$1,420.75
Quantity :
DCE 5224V-DSGSFP-48 with 48VDC power input and Hyper Extend is a 24-Port VDSL2 managed CO (Central Office) switch with two TP and SFP shared combo Ethernet Interfaces. The VDSL2 CO switch is perfectly designed for the networking applications of Telecom, ISP (Internet Service Provider), SI (System Integration), IP Surveillance Provider, and many other applications. DCE 5224V-DSGSFP-48 is based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). By networking with the DCE 5201V-BM, DCE 5204V-BM, DCE 5204V-MR, and DCE 5204V-NRD CPE (Customer Premises Equipment) with the DCE 5224V-DSGSSFP-48, Data Connect offers the absolutely fastest data transmission speeds over existing copper telephone lines that provides the ideal solution in the last mile.

Each VDSL2 interface of the DCE 5224V-DSGSFP-48 provides two copper phone ports, one for VDSL2 connection and the other one for POTS (Plain Old Telephone Service) connection. The DCE 5224V-DSGSFP-48 has a unique built-in splitter that allows voice, data, and streaming video (TV) to operate simultaneously over each VDSL2 2-Wire interface with no interruption.

Delivers High-Demand Services Connectivity for ISP / Triple Play Devices
Traffic Flow QoS Ensuring for Application Services
Selectable VDSL2 Data Rate for Service Differentiation
Console & Telnet CLI (Command Line Interface) and Advance WEB & SNMP management interfaces.
Link Aggregation, 802.1Q, Rapid Spanning Tree, IGMP Snooping & Bandwidth Control
Access Control List (ACL), RADIUS, 802.1X, MAC Filter, Static MAC, IPMAC, IP/MAC Binding, & Port Security

VDSL INTERFACE
24-Port VDSL2 via 1-RJ-21 (TELCO-50) connector
24-Port POTS Telephone via 1-RJ-21 (TELCO-50) connector

1000MBPS COPPER PORTS
Two 10/100/1000Mbps RJ-45 Auto- negotiation, Auto MDI/MDI-X

SFP/MINI-GBIC SLOTS
Two 1000Base-SX/LX/BX, shared with Port-25 & Port-26

CONSOLE - One RS232 Serial Port (DB9, 57600, N, 8, 1)
SURGE PROTECTION 3KV
SWITCH ARCHITECTURE Store and-Forward
SWITCH FABRIC 8.8Gbps / non-blocking
SWITCH THROUGHPUT 6.547Mbps @ 64Bytes
ADRESS TABLE 8K Entries
SHARED DATA BUFFER 512Kbps
MAXIMUM FRAME SIZE 9K Bytes

FLOW CONTROL
Back pressure for Half Duplex
IEEE 802.3x Pause Frame for Full Duplex

LED
System: Power, SYS Status
Alert: Fan 1, Fan 2, Power 1, Power 2
VDSL: VDSL Link/Sync
Gigabit Port: 1000 Link/Active, 100 Link/Active



RESET BUTTON
< 5sec: System Reboot
>10sec: Factory Default

DIMENSION (W x D x H) 440 x 200 x 44mm, 2U height
WEIGHT 6.4kg
POWER REQUIREMENT 48VDC
POWER CONSUMPTION 130Watts maximum
DISSIPATION - 404 BTU/hr maximum
OTHER - Reset Button for system reset & Reset to factory default

VDSL2 STANDARD
Comply with ITU-T G.993.1 & G.993.2
Supports provisioning the VDSL optional band (25K to 138K Hz) usage

BAND PLAN
Selectable band plan for each VDSL line on a per port basis
Band Plan A: Profile 998, Annex A of G.993.1; Optimized for Symmetrical Services
Band Plan B: Profile 997, Annex A of G993.1; Optimized for Asymmetrical Services

PROFILE
Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, & 30a for frequency bands (Annex A, B, & C) defined in G.993.2

ENCODING VDSL-DMT

VDSL2 FEATURES
Selectable Rate Limit Control
Selectable Target SNR (Signal to Noise Ratio) mode
POTS voices pass through

MANAGEMENT INTERFACE
Console, Telnet, Web Browser, SSL, SNMPv1 / v2c / v3

GIGABIT PORT CONFIGUATION
Port disable / enable
Auto-negotiation
10/100/1000Mbps Full & Half Duplex mode selection
Flow Control disable / enable

GIGABIT PORT STATUS
Display ports speed duplex mode, Link & Flow Control Status
Auto-negotiation status & trunk status

PORT MIRRORING TX / RX / Both, 1 to 1 Monitor

BANDWIDTH CONTROL
Ingress / Egress rate limit control
Gigabit Port Allow to configure per 128Kbps
VDSL2 Port Allow to configure per 5Mbps

VLAN
IEEE 802.1Q Tag-based VLAN, up to 256 VLANs groups, out of 4041 VLAN IDs
Port-based VLAN
GVRP, up to 128 dynamic VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE / Protected port) with two protected port groups




LINK AGGREGATION
Static Port Trunk
IEEE 802.3ad LACP (Link Control Protocol)
Supports 13 groups of 8Port trunk support

QOS
4 priority queue
Traffic classification based on
Port priority
802.1p priority
DSCP/TOS field in IP Packet
VoIP QoS by application protocol number

IGMP SNOOPING
IGMP (v1/v2) Snooping, up to 256 multicast Groups

ACCESS CONTROL LIST
IP-Based Layer 3 / Layer 4 ACL
Up to 220 ACL rule entries

SECURITY
Port Security (Disable Per Port of MAC Address Learning)
Status MAC, MAC filter, IPMAC Binding

SNMP MIBS
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3, & 9)
RFC-2737 Entity MIB

REGULATION COMPLIANCE
FCC Part 15 Class A, CE
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control & Back Pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging

STANDARDS COMPLIANCE
IEEE 802.1x Port Authentication Network Control
ITU-T G.993.1 (VDSL)
G.997.1
G993.2 VDSL2 (Profile 30a Support), Annex A
RFC-768 UDP
RFC-793 TFTP
RFC-791 IP
RFC-792 ICMP
RFC-2068 HTTP
RFC-1112 IGMP VERSION 1
RFC-2236 IGMP VERSION 2

CABLES
VDSL2: Twisted Pair telephone wires (AWG24 or better) up to .87 miles
10/100Base-TX: 2-Pair UTP Cat.5, up to 328ft
1000Base-T: 4-pair UTP Cat.5E, up to 328ft
1000Base-SX: 50/125µm & 62.5/125µm fiber optic cable up to 1,084ft
1000Base-LX: 9/125µm fiber optic cable, up to 6.3 miles, 50/125µm
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search