Shop

DCE CDL19.2G-DC Cellular Data Link Series-0

DCE CDL19.2G-DC Cellular Data Link Series

$712.50

In stock

SKU: CDL19.2G-DC Category:

Description

The Data Connect cellular based Cellular Data Link series
modem is the latest innovative wireless communication device,
offering a cost effective twoway connection between a central
host computer and remote RTU such as SCADA equipment and
meters over CDMA/1xRTT and GSM/GPRS networks. The
Cellular Data Link device supports RTUs and meters with
RS-232 or RS-485 serial ports at speeds from 1200 to 19200
bps.
The Cellular Data Link modems provides reliability and ease of
installation, making it an ideal low cost alternative to wired
devices for connecting remote devices to host data acquisition
equipment. The embedded TCP/IP protocol stacks support
operation over CDMA/1xRTT and GSM/GPRS data networks.
Operation over circuit switched data (CSD), dynamic IP, and
mobile IP (static IP) modes are all supported.
The Cellular Data Link cellular modems includes a dual-band
CDMA/1xRTT or GSM/GPRS transceiver. Power to the modem
can be a DC voltages source, or when connecting the modem to
an AC power source, a wide range AC to DC power converter
module is included. Standard dual band antenna or external high
gain antenna is supported by a panel-mounted SMA RF
Features:
Dual band 800/1900 Mhz CDMA or GSM/GPRS cellular or PCS frequency band support
Selectable data rates
Support for DTE at 1200, 2400, 9600 and 19200 bps
Selectable EIA RS-232/V.24 (DB-9F & RJ-11C) and RS-485 (RJ-11C) DTE serial port interface supports CSD, dynamic IP, and Mobile IP(static IP) protocols.
Built-in local and remote diagnostics and configuration management.
Over-the-air programming (OTASP for CDMA only)
Supports wide range of AC & DC power supply options:
-6-15 volts DC
-100-264 volts AC, 50/60Hz
Wide range of operating temperatures: -30 to +70°C
Optional features:
-Standard portable dual band antenna
-External high gain antenna
-NEMA 4X enclosure with internal power supply
TRANCIEVER SPECIFICATIONS
CDMA:
Dual band supports 800/1900 MHz
IS-2000 release 0 (CDMA 2000 1X)
IS-95A/IS-95B
IS-707A service options IS-835 (TCP/IP/PPP)
CSD, Simple IP, Mobile IP (Static IP)
Data Rate: 14.4 kbps (CSD, 153 kbps (1xRTT)
GSM:
Dual band supports 850/1900 MHz
International version: 900/1800 MHz
TX Output Power:
-850 MHz: Class 4 (2W) or class 5 (0.8W)
-900 MHz: Class 4 (2W)
-1800/1900 MHz: Class 1 (1W)
RX Sensitivity:
-850/900 MH: -105 dBm, typical
-1800/1900 MHz: -105 dBm, typical
GPRS Data Features
-Maximum baud rate: 85.6 kbps
-Coding scheme: CS1-CS4
-Multi-slot class 8 (4 down, 1 up)
-Class B GSM 07.10 multiplexing protocol
Antenna Interface
The modem provides a panel ount RF connector to support various antenna options. The antenna will meet the following specifications:
Frequency: 800-1990 MHz
Connector Type: SMA female
Impendance: 50 Ohms
Serial Port Interface:
The Cellular Data Link modem’s serrial ports support two types of interface standards, RS-232 or RS-485, selectable
RS-232:
Connector: DB-9F or RJ-11C, jumper selectable
Signals: RTS, CTS, CD, DTR, DSR, TD, RD, RI
(DB-9F) RTS, CTS, CD, RD (RJ11C)
RS-485:
Connector: RJ-11C
Signals: TX+, TX-, RX+ RX- (4-wire)
Data Rate Support:
Data speed: 1200, 2400, 9600, 19200 bps, asynchronous
Character Format: 7-E-1, 7-O-1, 8-N-1, 9-E-1
Front Panel Indicators & Controls
LED Indicators:
PWR, RTS, CTS, TD, CD, RD, DSR
Alphanumeric Display:
Self test status, RSSI Indicator, MDN, ESM, OTS, IP address
Test Button:
Provide selection of modem/tranciever status
Power Supply Specification
Power Input: 6 to 15 VDC:
AC to DC adapter: 100-264 VAC, 50/60Hz, 100-400 VDC
Power Consumption:
Idle mode: 1.0 watts
Peak power: 6.0 watts, pulse
Average: 4.0 watts, typical
Mechanical Specifications
Enclosure Dimensions:
4.1″(W) x 4.9″(L) x 1.4″(H)
104mm(W) x 126mm(L) x 36mm(H)
Weight: 0.75 lb, without AC power module
Environment Specifications
Temperature:
Operation: -30° to +70°C
Storage: -40° to +85°C
Humidity:
Up to 95% non-condensing
Ordering Information
DCE/CDL19.2C: CDMA standalone with AC power supply, 90-264 VAC or 115-400 VDC
DCE/CDL19.2C-DC: CDMA standalone with DC power supply input from 6 to +15 volts
DCE/CDL19.2G: GSM standalone with AC power supply, 90-264 VAC or 115-400 VDC
DCE/CDL19.2G-DC: GSM standalone with DC power supply input from 6 to +15 volts
DCE/CDL-NEMA4: NEMA4X Enclosure with internal 100-264 VAC power supply

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in