CopperLink™ Model 2158A/EUI/2PK

Advanced Search

DATA CONNECT ENTERPRISE PRODUCTS

DATA CONNECT V.3600UI MODEM SERIES

DATA CONNECT SURGE PROTECTORS

DATA CONNECT IG202T MODEM SERIES

DATA CONNECT DSP MODEM SERIES

DATA CONNECT SWITCHES

DATA CONNECT C-LINK INDUSTRIAL CELLULAR MODEM SERIES

DATA CONNECT STARCOMM (ST) MODEM SERIES

DATA CONNECT SERIAL TO ETHERNET CONVERTERS

DATA CONNECT MIU MODEM SERIES

DATA CONNECT D4 CHANNEL BANKS

DATA CONNECT PONY EXPRESS MODEM SERIES

DATA CONNECT MYRIAD MODEM SERIES

DATA CONNECT INDUSTRIAL MODEM SERIES

DATA CONNECT CTEC MODEM SERIES

DATA CONNECT WIRELESS COMMUNICATIONS

Store

Patton Electronics

2158A/EUI/2PK

Email this to a friend

CopperLink™ Model 2158A/EUI/2PK	2158A/EUI/2PK
12.5-Mbps Ethernet Extender

		Can Ship Price	Qty
		$565.25

Detailed Description

Features & Benefits
High-speed full-duplex 12.5 Mbps communications link
Extends Ethernet connections up to 4,500 ft. (1,372 m)
Easy 2-wire CopperLink connection via built-in RJ-45 or 2-position terminal block
Integrated MDI-X switch to allow easy connection to any computer or LAN
Passes higher layer protocols and supports 802.1Q (VLAN tagging)
Automatic learning and aging address table
Five LEDs monitor power, CopperLink link and status, Ethernet link and activity
Auto-sensing 10 or 100Base-T and full or half-duplex Ethernet operation
No configuration required!

Overview

The Patton CopperLink Ethernet Extender offers one of the most efficient, reliable, and cost-effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services—all at 12.5 Mbps! The Patton Model 2158A offers premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.

CopperLink Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the twisted-pair telephone wire to the CopperLink RJ-45F jack or terminal block, the external power supplies to the units and an appropriate power source, and you're ready to operate. The CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. No configuration is required!

Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton's CopperLink Ethernet Extender is one of the most simple and cost effective solutions around!

CopperLink™ Copper Ethernet Extenders

Take your network connections faster and farther over existing voice-grade wire with Patton CopperLink™ Ethernet Extenders!

Max. Distance
Max. Speed
Distance at Max. Speed
CopperLink™ Model
1 mile
(1.6 km)
50 Mbps
800 feet
(243.9 m)
Model 2172
1.1 miles
(1.8 km)
16.6 Mbps
3,125 feet
(952.5 m)
Model 2168A
0.75 miles
(1.2 km)
12 Mbps
4,000 feet
(1219.2 m)
Model 2158A
5.7 miles
(9.2 km)
4.6 Mbps
2.0 miles
(3.2 km)
Model 2157
5.7 miles
(9.2 km)
2.3 Mbps
3.1 miles
(5 km)
Model 2156
5 miles
(8 km)
144 kbps
5 miles
(8 km)
Model 2155

Applications

Ethernet Extension Application
Used in pairs, the Model 2158A establishes a high-speed 12.5 Mbps communication link inter-connecting two geographically separated LANs. Operation is simple: packets destined for the remote LAN are sent transparently, at full line rate, to the peered LAN. The Patton Model 2158A can also be used to reach remote PCs and other equipment and for delivering last mile ISP services.

Back-to-Back Extension Application
Use the Patton Model 2158A units in a back-to-back configuration, using an Ethernet crossover cable, to double the length of your high-speed Ethernet connection!

Specifications

CopperLink Interface: RJ-45 (pin 4=TIP; pin 5=RING)
Ethernet Interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation
Protocol: Transparent to high layer protocols. Supports 802.1Q VLAN tagging
Transmission: CopperLink line rate: 12.5 Mbps; Data rate: 10 Mbps full-duplex
Surge Supression: CopperLink maximum current surge: 20kA (8/20_s) gas tube
Front Panel Indicators: Power, CopperLink Link and Error, Ethernet Link and Activity status.
External Power Supply Options:
• AC: 120 VAC and Universal Power Supply (100�240 VAC)
• DC: -48 VDC, -24 VDC, and -12 VDC (optional upon request)
Compliance: FCC Part 15 Class A; EMC Directive 89/336/EEC, Low
Voltage Directive 73/23/EEC; CE Mark
Temperature: 32 to 122�F (0 to 50�C)
Altitude: 0�15,000 ft (4,572 m)
Humidity: Up to 90% non-condensing
Dimensions:
• Standalone: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
• Rack card: 3.0 H x 0.83 W x 7.84 D in. (7.6 H x 2.1 W x 19.9 D cm)
Weight:
• Standalone: 0.4 lbs (0.18 kg) without power supply
• Rack card: 0.3 lbs (0.14 kg)
Model # Description
2158A/EUI-2PK CopperLink 12.5 Mbps Ethernet Extender Kit (1 Local Unit and 1 Remote Unit); 100-240VAC

Your Cart Is Empty

ETHERNET EXTENDERS
ON SALE!!!

WIRELESS
PRODUCTS

MOTOROLA CANOPY

WIRELESS INTERNET PLATFORM

WIRELESS MODEMS

MULTITECH
MT-GSM/GPRS
$247.00
CISCO EQUIVALENT ETHERNET SWITCHES
AT HALF THE CISCO PRICE!

CYBERPATH

ETHERNET & TOKEN RING NIC SPECIALS! !

DCB

FIBROLAN

UDS MOTOROLA MODEMS IN-STOCK!!!

MOTOROLA MODEMS

UDS MOTOROLA DIGITAL UNITS
IN-STOCK!!!

CODEX MOTOROLA MODEMS & DIGITAL UNITS IN STOCK!!!

MOTOROLA ROUTERS IN STOCK!!!