Shop

ETHERWAN 72141-10B MANAGED HARDENED SWITCH-0

ETHERWAN 72141-10B MANAGED HARDENED SWITCH

$1,054.50

In stock

SKU: SKU - 1220 Category:

Description

Designed for rugged environments, the EtherWAN Hardened EX72000 Series
Switch comes with twelve 10/100Mbps RJ45 ports and two 100Base-FX or Gigabit
ports in a package that offers several mounting options. The EX72000 functions
at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for
functional operation @ -40°C to 85°C (-40°F to 185°F). Fully managed via SNMP,
Web Browser, Telnet or Console port. The EX72000 is designed to integrate 10/100
Mbps networks into100Base-FX or Gigabit backbones. The Gigabit ports can be
copper or fiber optic ports. The Hardened EX72000 series supports advanced
features such as 802.1Q VLAN, MAC-based Trunking, IP-Multicast IGMP Snooping,
Rapid Spanning Tree for Redundancy, QoS for priority queuing, and port mirroring. Users may choose among SNMP/RMON, Web browser, or Telnet for remote
monitoring and configuration. It also supports rate control, which allows users to set the maximum bandwidth on each port individually. EtherWAN offers a line of products that provide a total solution for Ethernet applications in industrial and rugged environments.

FEATURES
-Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
-Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
-IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
-IP Multicast Filtering through IGMP Snooping
-Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
-IEEE802.1p QoS with four priority queues
-MAC-based trunking with automatic link fail-over
-RS-232 console, Telnet, SNMP V1, V2 & V3, RMON, Web Browser, and TFTP Management
-Supports Command Line Interface in RS-232 Console
-Supports IEEE802.1x Security
-Bandwidth Rate Control
-Per-port programmable MAC address locking
-Up to 24 Static Secure MAC addresses per port
-Port mirroring
-8192 MAC addresses
-2M bits buffer memory
-1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
-Full wire-speed forwarding rate
-Redundant power inputs with Terminal Block and DC Jack
–40°C to 75°C (-40°F to 167°F) operating temperature range
-Metal case
-Supports DIN-Rail, Panel, Rack Mounting installation

ORDERING INFORMATION
EX72140-00Z 14-port 10/100Base-TX Hardened Managed Ethernet switch
EX72141-X0Z 13-port 10/100Base-TX + 1-port 100Base-FX Hardened Managed Ethernet switch
EX72142-X0Z 12-port 10/100Base-TX + 2-port 100Base-FX Hardened Managed Ethernet switch
EX72102-X0Z 8-port 10/100Base-TX + 2-port 100Base-FX Hardened Managed Ethernet switch
EX72128-0YZ 12-port 10/100Base-TX + 1-port Gigabit Hardened Managed Ethernet Switch
EX72129-0YZ 12-port 10/100Base-TX + 2-port Gigabit Hardened Managed Ethernet Switch
EX72088-0YZ 8-port 10/100Base-TX + 1-port Gigabit Hardened Managed Ethernet Switch
EX72089-0YZ 8-port 10/100Base-TX + 2-port Gigabit Hardened Managed Ethernet Switch

100FX Fiber Options:
(X) = 1 : Multi Mode (SC)
2 : Multi Mode (ST)
A : Single Mode (SC) -20Km
B : Single Mode (SC) -40Km
H : Single Mode (ST) -20Km
P : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
Q : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km
R : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
S : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km

*More 100FX Fiber options also available upon request.

Gigabit Options:
(Y) = 1 : 10/100/1000Base-TX
3 : 1000Base-SX (SC)
A : 1000Base-LX (SC) -10Km
B : 1000Base-LX (SC) -20Km
R : 1000Base-LX (SC) WDM -TX:1310nm/RX:1550nm -20Km
S : 1000Base-LX (SC) WDM -TX:1550nm/RX:1310nm -20Km

*More Gigabit options also available upon request.

Power Input Interface:
(Z) = B : Terminal Block & DC Jack

Power Supply: (Optional)
*Options A – Terminal Block power supply(s), part numbers: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Options B – DC Jack power supplies kit(s), part numbers: 41-136044-X X=1,2,3,4,5
*See page 4-5 to 4-9 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter)

SPECIFICATIONS
Technology
Standards:
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX,
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/1000Base-LX,
IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x
Forward and Filtering Rate:
14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps
Packet Buffer Memory:
2M bits
Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size:
8192 MAC addresses
Power
Input:
Input Voltage: 12 to 32VDC (Terminal Block); 12VDC (DC Jack)
Power Consumption:
15W Max. 1.25A@12VDC, 0.625A@24VDC
Power Supply References:
Terminal Block: 12 to 24VDC, 1.5A
DC Jack: 12VDC, 3A
Overload Current Protection:
Present
Reverse Polarity Protection:
Present
Mechanical
Casing:
Metal case
IP 20
Dimensions:
235mm (W) x 125mm (D) x 50mm (H)
(9.25″ (W) x 4.92″ (D) x 1.97″ (H))
Weight:
1.5Kg (3.3lbs.)
Installation:
DIN-Rail, Panel, Rack Mounting
Interface
Ethernet Port:
10/100Base-TX: 14, 13, 12 or 8 ports
100Base-FX: 0, 1 or 2 ports
Gigabit: 0, 1 or 2 ports
Console Port:
Port: One DB9 RS-232 port
LED Indicators:
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX, 100FX: Link/Activity, Speed
10/100/1000TX, 1000SX/LX: Link/Activity, Speed
Environment
Operating Temperature:
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Regulatory Approvals:
ISO:
Manufactured in an ISO9001 facility
Safety:
UL508, EN60950-1, IEC60950-1
EMI:
FCC Part 15, Class A
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3
EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / – 4KV; Criteria B
Air: + / – 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV; Criteria B
D.C. Power Ports: + / – 4KV; Criteria B
A.C. Power Ports: + / – 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A EN61000-4-11 (Voltage Dip Standards)
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria BEnvironmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
NEMA TS1/2 Environmental requirements for Traffic control equipment

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in