Description

DATA CONNECT IG56-HV V.92 56KBPS STANDALONE DIAL MODEM HIGH VOLTAGES

RUGGEDIZED MODEMS
The Data Connect DCE/IG56 high-speed V.92 dial-line modem are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN). The DCE IG56 utilizes the industries latest V.92 modem technology to deliver outstanding features, performance, and reliability in one cost-effective solution.
The DCE IG56 modems are ideally suited for industrial communication applications including SCADA systems, RT’s, traffic monitor and control, and industrial automation networks. The DCE IG56 supports RTU’s equipped with an EIA RS-232 or RS-485 serial port. Data communications speeds up to 56Kbps are supported.
The modem incorporates the latest data compression and error-correction standards for improved data transmission and reception over marginal and poor-quality telephone lines.
The DCE IG56 modems are powered by a wide range of AC and DC power supply voltages. Its power consumption and low stand-by current technology design makes the DCE IG56 ideal for battery-powered system as well as regular ac powered operation.

FEATURES
Worldwide Operation Support:
-ITU-T V.92/V.34BIS/V.34/V.32BIS/
-V.32/V.22bis/V.22 /V.23/V.23/V.21
-V29 FastPOS
-V.22bis fast connection

Data Compression:
-V.44/V42bis/MNP 2

Error Correction:
-V.42/MNP 2/MNP 4

DTE/ Host Interface
EIA RS-232 and RS-485

Embedded AT command set

Sixty-three embedded and upgradeable
Country profiles for worldwide homologation

NVRAM fro configuration and country profile storage

Built-in diagnostic and configuration management

Heavy-duty surge protection provided at power supply and
Phone line interface

Supports wide range of AC and DC power supply options

Supports DC power supplied from DTE or DB-9 connector

Wide range of operating temperatures

Optional mounting kits for DIN Rail mounting or wall mount

SPECIFICATION
Data Rate Support
Data modem:
ITU-T V.92: Up to 56Kbps
V.34bis: Up to 36600 bps
V.32bis/V.32 Up to 14400 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200 bps
Bell 103: 0-300 bps

Fax modem:
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2

Data Format: Asynchronous, 7, 8, or 9 data bits, parity, 10- or 11-bit character with 1 or 2 stop bits

Modulation
Fully compatible with ITU-T V.92/V.34/V.32bis/V.22bis/V.21 Bell 212A and Bell103 compatible modes

Transmission Line Interface
2-wire full-duplex over PSTN
Connector: RJ-11C

DTE/RTU Interface
The modem provides serial ports to support RS-232 or RS-485
(Selectable) interface standards:

RS-232 Interface
Connector: DB9-F
Signals: RTS, CTS, CD, TD, RD, DTR, DSR, RI

RS-485 Interface
Connector: RJ-11C
Signals: 4-wire full duplex or 2-wire half duplex
TX+, TX-, RX+, RX-

Front Panel Indicators
LED: Indicators:
DTR, TXD, RXD, DCD, DSR, RI

Power supply
Three models support various power options:
Standalone: 90-264 VAC
Standalone: 100-400VDC
Standalone: 10-48VDC
Power consumption:
Idle mode: 65 mA@12V, 0.78 watts
Normal mode: 75 mA@12V, 0.9 watts, typical

Mechanical
Enclosure dimensions:
4.1” (W) x 5.0” (L) x 1.3” (H)
104mm (W) x 127mm (L) x 33mm (H)
Weight: 0.5 pound, without AC power module

Environment
Temperature:
Operation: -40C to +85C
Storage: -40C to +85C
Humidity:
Up to 95% non-condensing

Dry Contact Detection (optional)
Two optical isolated dry contact detection are provided for two external devices (consult factory for additional information).

ORDERING INFORMATION

DCE/IG56
Standalone with AC power module, 90-264VAC

DCE/IG56DC
Standalone, DC power, 10-48VDC

DCE/IG56-HV
Standalone with AC power module, 90-264VAC or 100-400VDC

DCE/IG202T-DIN
DCE EN2 Din Rail Kit