Description

The EX93000 series Ethernet switches are designed to operate in the harsh
environments at the edge of the network. The EX93000 functions at temperatures
ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional oparation @-40°C to 85°C (-40°F to 185°F). Whether on the factory floor or the street corner, the EX93000 will provide flawless communications when you need it most. The EX93000 is a switch with the flexibility of eight Ethernet ports that may be configured in various combinations of copper and fiber optic interfaces. Flexibility is the main feature of the EX93000, it may be DIN rail, shelf or wall mounted, and comes with power options to match the applications that require a tough, environmentally hardened, Ethernet switch.

FEATURES
-Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
-Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
-2048 MAC addresses
-768K bits buffer memory
-10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
-Full wire-speed forwarding rate
-Alarms for power failure by relay output
-Redundant power inputs with Terminal Block or DC Jack
–40°C to 75°C (-40°F to 167°F) operating temperature range
-Hardened aluminum case
-Supports DIN-Rail, Panel or Rack Mounting installation

ORDERING INFORMATION
EX93008-00-I-P 8-port 10/100Base-TX Hardened Unmanaged Ethernet Switch
EX93018-XY-I-P 8-port 10/100Base-TX + 1-port 100Base-FX Hardened Unmanaged Ethernet Switch
EX93026-XY-I-P 6-port 10/100Base-TX + 2-port 100Base-FX Hardened Unmanaged Ethernet Switch
EX93044-XY-I-P 4-port 10/100Base-TX + 4-port 100Base-FX Hardened Unmanaged Ethernet Switch

100FX Fiber Options:
(XY) = 1A : Multi Mode (SC)
1B : Multi Mode (ST)
2A : Single Mode (SC) -20Km
2B : Single Mode (SC) -40Km
2D : Single Mode (ST) -20Km
2E : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
2F : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
2G : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km
2H : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km

*More 100FX Fiber options also available upon request.

Installation Type:
(I) = 1 : DIN Rail (mounting kit is included)
Optional Panel mount kit, ordered separately, part number: KP-AA96-480
Optional Rack mount kit, ordered separately, part number: KR-BK43-400

Power Connector Options :
(P) = A : Terminal Block* / B : DC Jack**
*Option A – The Terminal Block type external power supply are not included. Please order the following part numbers, as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Option B – The external power adapter and power cord are not included. Please order the following part numbers, as required: 41-136044-X X=1,2,3,4,5
*See page 4-5 to 4-9 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter)

SPECIFICATIONS
Technology
Standards:
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX,
IEEE802.3x
Forward and Filtering Rate:
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory:
768K bits
Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size:
2048 MAC addresses
Latency:
Less than 7.1ìs
Power
Input:
Input Voltage: 12 to 30VDC (Terminal Block); 12VDC (DC Jack)
Power Consumption:
13.2W Max. 1.1A@12VDC, 0.55A@24VDCPower Supply References:
Terminal Block: 12 to 24VDC, 1.5A
DC Jack: 12VDC, 3A
Reverse Polarity Protection:
Present
Mechanical
Casing:
Aluminum case
IP20
Dimensions:
50mm (W) x 125mm (D) x 135mm (H)
(1.97″ (W) x 4.92″ (D) x 5.31″ (H))
Weight:
0.8Kg (1.76lbs.)
Installation:
DIN-Rail, Panel, Rack Mounting
Interface
Ethernet Port:
10/100Base-TX: 8, 6 or 4 ports
100Base-FX: 0, 1, 2 or 4 ports
LED Indicators:
Per Unit: Power Status (Power 1, Power 2)
Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow)
Alarm Contact:
One relay output with current 1A @ 24VDC
Environment
Operating Temperature:
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Regulatory Approvals
ISO:
Manufactured in an ISO9001 facility
Safety:
UL60950-1, EN60950-1, IEC60950-1
EMI:
FCC Part 15, Class A
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3
EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / – 4KV; Criteria B
Air: + / – 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV; Criteria B
D.C. Power Ports: + / – 4KV; Criteria B
A.C. Power Ports: + / – 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
EN61000-4-11 (Voltage Dip Standards)
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B
Environmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
NEMA TS1/2 Environmental requirements for Traffic control
equipment
1