Shop

Patton CL1314/EUI-2PK CopperLink Ethernet Extender-0

Patton CL1314/EUI-2PK CopperLink Ethernet Extender

$1,080.00

In stock

SKU: SKU - 1932 Category:

Description

CopperLink Ethernet Extender
Patton CL1314

Ethernet extension doesn’t have to be expensive of difficult. Patton’s CL1314 long range Ethernet Extenders opens the door to cost-effective Ethernet extension that is easy to set up. Featuring plug-and-play installation, the CL1314 CopperLink Ethernet Extenders leverage existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at high speeds over long distances.

Operating over standard 0.5mm (24 AWG) voice-grade wiring, CL1314 delivers speeds up to 5.7 Mbps and extends Ethernet connections across distances ranging from 2.7 to 6.9 km (1.7 to 4.3miles). Whether you need connect to a remote office or private-network backbone corporate LAN—or interconnect such network-enable devices such as PCs, digital sensors and IP cameras—Patton Ethernet Extenders offer the industry’s optimum combination of speed and distances.

Patton’s CopperLink Ethernet Extenders ensure hassle-free set-up and operation, while achieving the highest possible line rate for the required distances and electro-magnetic environment. Users “hard-set” the desired line rate via DIP switch or console Telnet.

The CL1314 comes with a built-in 4-port, auto sensing, 10/100TX Ethernet switch that provides automatic medium-dependent interface crossover capability (auto-MDIX). That means you can use cross-over or straight-through cables (whichever is handy) to connect up to four Ethernet devices. The  auto-MDIX features detects the polarity of cabling on each port, and automatically configures the signaling to match. Absolutely no user-configuration is required.

Operating at layer 2 of OSI model (data link layer), the CL1314 transparently passes all high protocols—including VLAN tagging, multicast addressing, VPN pass-through for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MOBUS/TCP and PROFINET 10.

Set-up is easy! Simply connects up to four LAN devices to the Ethernet switch, plug the copper twisted pair into each extender, and apply power! For simple cost-effective and efficient Ethernet extension, Patton CopperLink Ethernet Extenders are ideal solution!


Features

·         High Speed extension – Achieve speeds up to 5.7 Mbps.

·         Multi-rate Selection – Just plug the units in and select the ideal user-configurable rate for your application.

·         CopperLink 2-wire Connection – Easy 2-wire CopperLink connection via built-in RJ-11 port.

·         Built-in 4-Port Ethernet Switch – Connects up to four Ethernet devices using the integrated 4 x 10/100Base-T, auto-sensing, full/half-duplex Ethernet switch.

·         Transparent LAN Bridging – Transparently pass high-layer protocols with support for 802.1Q VLAN tagging.

·         Automatic Learning, Aging and Filtering – Keeps local traffic local, ensuring efficient utilization of the long-range link.

·         Made on the USA – This Patton equipment is designed by Patton engineers and built. Patton’s American made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Applications

Typical Application
When interconnecting sites on a corporate campus, buildings and network devices often lie beyond reach of a standard Ethernet segment. Now, you can use existing copper network infrastructure to connect remote LANs across longer distances and at high speeds than previously thought possible. Patton’s CopperLink long range Ethernet Extender is the ideal solution for simple, cost-effective, high-speed campus LAN extension. Ethernet plug-n-play operation gets your network up and running in seconds. Providing four auto sensing full/half duplex 10/100Base-T Ethernet ports – plus an integrated crossover switch for hassle free system setup the value of this Ethernet extender is unsuppressed.

Plug-and-Play just unpack a pair of extension and plug in the cables. Apply power and your connection is up and running. It just doesn’t get any easier!

High Speed/Long Reach the CL1314 Ethernet extender provides the industry’s ultimate combination of speed and distance! 

Specifications

Protocol                                   Transparent to higher layer protocols

Transmission Line                      Single twisted pair

Line Rate LED Status Indicator   Rates from 192 kbps to 5.7 Mbps, selectable in all 64 kbps increments up to 5.7Mps

Line Coding                              TC-PAM 16 for rates from 192 to 192 to 2.3 Mbps, TC-PAM 32 for rates above 2.3 Mbps

Connectors                              RJ-45 on copper line side and 4 x 10/100 Ethernet, shrouded male IEC320 power connector 

Line Interface                            transformer coupled, 1500 VAC isolation

Management                             DIP switch, Telnet console

MTBF                                      4.7 years

Power                                       External 90-260 VAC, 50-60 Hz (universal Input)

Operating Temperature              32° to 122°F (0° to 50°C)

Humidity                                   5 to 95% non-condensing

Altitude                                     0 to 15000 ft (0 to 4600 m)

Dimensions                               4.7 x 1.52 x 5.00 in. (106 x 390 x 127 mm)

Weight                                      2.0lbs (1kg)

Compliance                               FCC part 15A, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC


Ordering Information

Model#                                               Description

PAT/CL1314/EUI-2pk                             5.7 Mbps CopperLink Ethernet Extender Kit (Local and Remote); 4×10/100VAC

PAT/CL1314/L/EUI                                 5.7 Mbps CopperLink Ethernet Extender (Local); 4 x10/100; 100-240VAC

PAT/CL1314/R/EUI                                5.7 Mbps CopperLink Ethernet Extender (Remote); 4 x10/100; 100-240VAC

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in