Shop

DATA CONNECT EPORT102-LV SERIAL TO ETHERNET CONVERTER-0

DATA CONNECT EPORT102-LV SERIAL TO ETHERNET CONVERTER

$216.00

In stock

SKU: EPORT102-LV Category:

Description

DIN rail or Panel mount.
Supports 10/100 Mbps Ethernet.
Supports RS232, RS422, and RS485 serial interface.
Supports LAN and WAN communications.
In Server mode supports individual client sessions for security.
Management access password protected.
Virtual COM drivers for Windows NT/98/ME/2000/XP.
Supports socket connection, TCP server, TCP client, and UDP.
Supports up to 8 TCP connection in TCP server mode.
Heart beat connection ensures reliable TCP connection against power failure or network disruption.
Supports loop back mode. Data is echoed back for easily testing the connection.
The Data Connect Eport-10x Ethernet serial server connects RS-232, 422, 485 serial devices to an Ethernet LAN/WAN providing a reliable communication connection. The ESport-10x Windows driver installs virtual COM ports in the Device Manager of the operating system. The virtual COM port is designed to establish a connection with the ESport-10x. This in turn will allow communications with the connected serial device in the same manner as a device connected to the COM port in a PC. The LAN becomes transparent to the serial device and the software running on the PC. ESport-10x also offers a Heart Beat feature to insure a reliable communications connection.
The Eport-10x can be configured as a TCP Client/Server or UDP. The ESport-10x operates in “Direct IP Mode”, “Virtual COM Mode”, and “Paired Mode”.
Direct IP Mode
Direct IP connections allow applications using TCP/IP or UDP/IP network socket programs to communicate with the asynchronous serial port on the ESport-10x. In this type of application the Eport-10x is configured to TCP or UDP server. The socket program running on the PC establishes a communication connection with the ESport-10x. The raw data is sent directly to and from the serial port.
Virtual COM Mode
The Virtual COM mode requires the installation of a virtual COM port device driver. In this mode, the Eport-10x must be set to either TCP/server or UDP/server in the menu with a designated communication port number.
The virtual COM driver is a TCP or UDP client. Once the connection is made, the LAN is transparent to the serial device. Applications work just as if the serial device is connected a hosts physical COM port. The virtual COM port converts the applications data into IP packet destined for the Eport-10x, which in turn converts the IP packet back to serial data.
Paired Mode
Paired mode is also called serial tunneling. When this type of configuration is selected, No additional software is needed to install in a host PC. In fact a PC is not required to make the connection. Any two dumb serial devices that can communicate with each other through a serial link will be able to communicate using two Eport-10xs and the LAN. ESport-10XEthernetSerialESport-10XSerial
Two Eport-10xs are configured with one setup as a TCP or UDP client and the other to TCP/UDP server. When setting up the Server, the Remote IP address section must contain the address of the Client. This will allow the Clients IP address to pass the IP address-filtering feature of the Server. Conversely, the Remote IP address of the Client must contain the Servers IP address.
Heart Beat ESport-10XEthernetSerial
The Eport-10x provides a convenient way to establish reliable communications between two devices. Communication port 5300 is reserved for the Heartbeat Protocol. If a loss connection occurs the Heart Beat
feature will try to reconnect the TCP data connection every 5 seconds until communications is established again.
Loop Back
Eport-101/ESport-102 will work at Loop back Mode, all data is sent back immediately. This feature makes the connection testing easy.
Specifications
Serial Buffer:
output: 64K bytes for ESport-101/ESport-102,
32K bytes for ESport-104
Input: 8K bytes per port
Serial Connection:
DTE BD-9 male
LAN:
10/100 Mbps Auto-detecting 10 Base T,
100 Base TX
Serial Interfaces:
RS-232 – TX, RX, RTS, CTS, DTR,
DSR, DCD, GND
RS-422 TX+, TX-, RX+, RX-, RTS+, RTS-,
CTS+, CTS-, GND
RS-485 – Data +, Data , GND
Data Rate:
110 bps to 230.4 k bps
Parity:
none, even, odd, mark, space
Data Bits:
5, 6, 7 or 8
Stop Bits:
1, 1.5 or 2
Protocol:
TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
Management:
Manager software, Serial Console, Telnet, Web server Firmware upgradeable
Dimensions:
ESport-101/ESport-102 —
3.35 x 4.5 x 0.90 in (8.5 x 11.5 x 2.3 cm)
ESport-104 —
4.5 x 7.3 x 1.1 in (11.4 x 18.5 x 2.9 cm)
Power Requirements:
9 ~15 VDC
300 mA ESport-101,
300 mA ESport-102,
500 mA ESport-104
Operating Temperature:
0 to 50 °C (32 to 122 °F)
Storage Temperature:
-20 to 60 °C (-4 to 140 °F)
Humidity:
0 90% Non-Condensing
Approvals:
CE, FCC
Pin Assignment
DB9 M
Pin
RS232
RS422
RS485
1
DCD
RX-

2
RXD
RX+

3
TXD
TX+
DATA+
4
DTR
TX-
DATA-
5
GND
GND

6
DSR
CTS-

7
RTS
CTS+

8
CTS
RTS+

9
RI
RTS-

123456789DB9 Male

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in