Shop

DCE 2178MPEE Industrial Ethernet Extender-0

DCE 2178MPEE Industrial Ethernet Extender

$802.75

In stock

SKU: 2178MPEE-3 Category:

Description

DATA CONNECT 2178MPEE MULTIPORT
The Data Connect DCE/2178MPEE Industrial Grade Multi Port Ethernet Extender is an one 4-port 10/100Base-TX switch and one 2- wire Ethernet port used to extend Ethernet up to 300 meters (984 feet) at 50Mbps over two existing voice grade copper wires. A simple single switch allows for a choice between local or remote setting. Thus select local for side A of the circuit and select remote for side B of the circuit. The DCE/2178MPEE is fully managed via SNMP, Web Browser, Telnet or Console port and is designed to integrate 10/100 Mbps networks into VDSL backbone. The DCE/2178MPEE supports advance features such as 802.1Q VLAN, MAC- based Trunking, IPMulticast IGMP Snooping, Rapid Spanning Tree for Redundancy, QOS foe Priority Queuing, and Port Mirroring. The DCE/2178MPEE functions at temperatures ranging from -40 Degrees Celsius to 75 Degrees Celsius (-40 Degrees Fahrenheit to 167 Degrees Fahrenheit) and tested for functional operation at -40 Degrees Celsius to 85 Degrees Celsius (-40 Degrees Fahrenheit to 185 Degrees Fahrenheit). The DCE/2178MPEE complies with NEMA TS1 & TS2 that meets with Environmental requirements for Traffic Control equipment and complies with IEC61000-6-2 EMC, a Generic Standard Immunity for the industrial environment.

SPECIFICATIONS

Technology Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, Ethernet over VDSL, IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x
Forward and Filtering Rate: 14,880pps for 10Mbp, 148,810pps for 100Mbps Packet Buffer Memory: 2M bits
Processing Type: Store-and-Forward, Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size: 8192 MAC addresses
Power Input: Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) Power Consumption: 11W Max. 0.92A@12VDC, 0.46A@24VDC
Overload Current Protection: Present
Reverse Polarity Protection: Present
Mechanical Casing: Aluminum case, IP 30
Dimensions: 60mm (W) x 125mm (D) x 145mm (H), (2.36″ (W) x 4.92″ (D) x 5.7″ (H))
Weight: 1.1Kg (2.42lbs.)
Installation: DIN-Rail
Interface Ethernet Port: 10/100BASE-TX: 4 ports
Ethernet Extender Ports: RJ-11 and Terminal Block port: 2 ports
Speed: 1/3/5/10/15/20/25/30/40/50 Mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger
Console Port: Port: One DB9 RS-232 port
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX: Link/Activity, Speed Extender Port: Link :DIP switch: Two DIP switches: Local (CO) or Remote (CPE)
Alarm Contact: One relay output with current 1A@24VDC
Environment Operating Temperature -40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)

Regulatory Approvals
ISO: Manufactured in an ISO9001 facility
EMI: FCC Part 15, Class A, EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-3
EMS: EN61000-6-2, EN61000-4-2 (ESD Standards), Contact: + / 6KV; Criteria B, Air: + / – 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards), 10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards), Signal Ports: + / – 4KV; Criteria B D.C. Power Ports: + / – 4KV; Criteria B
EN61000-4-5 (Surge Standards), Signal Ports: + / – 1KV; Line-to- Line; Criteria B, D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @ 0.15~80MHz;30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance: IEC60068-2-6 FC (Vibration Resistance) 5g @ 10~150KHz, Amplitude 0.35mm
(Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall), 1M (3.281ft)

FEATURES

Complies with NEMA TS1 & TS2 Environmental
Requirements for Traffic Control equipment
Complies with IEC61000-6-2 EMC Generic Standard
Immunity for industrial environment
Ethernet Port: 10/100Mbps-Full/Half duplex, Auto- Negotiation, Auto-MD/MDX
Ethernet Extender (RJ11 and Terminal) Port: Symmetrical on the VDSL, High speed, Full-duplex, 50Mbps
communications link over existing copper
Telephone Line
-40 Degrees Celsius to 75 Degrees Celsius (-40 Degrees Fahrenheit to 167 Degrees Fahrenheit) operating
temperature range
1000Mbps-Full Duplex, 10/100Mbps-Full/Half duplex, Auto- Negotiation, Auto-MD/MDX
RS232 console, Telnet, SSL/SSH, SNMP V1, V2C, & V3, RMOM, Web Browser, and TFTP Management
Data Connect proprietary ‘a-ring’ support for Network
Redundancy; recovery time <15ms
IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
Supports port-based VLAN and IEEE802.1Q VLAN
Tagging and GVRP
IP Multicast Filtering through IGMP Snooping V1, V2, & V3
IEEE802.1P QOS with four priority queues
Mac-based trunking with automatic link fail-over
Supports Command Line Interface in RS232 Console
Supports IEEE802.1X Security
Bandwidth Rate Control
Per-port programmable MAC address locking
Up to 24 Static Secure MAC addresses per port
Port Mirroring
Full wire-speed forwarding rate
Redundant Power Inputs with Terminal Block and DC Jack
Hardened aluminum
Supports NTP

ORDERING INFORMATION

DCE/2178MPEE
DCE/2178MPEE-DC12J
DCE/2178MPEE-DC12TB
DCE/2178MPEE-DC48TB

DCE/2178MPEE-DC12J
DCE/2178MPEE-DC12TB
DCE/2178MPEE-DC48TB

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in