Shop

ETHERWAN 45062-A0B HARDENED NON-MANAGED PoE (PSE) SWITCH-0

ETHERWAN 45062-A0B HARDENED NON-MANAGED PoE (PSE) SWITCH

$1,007.00

In stock

SKU: SKU - 1158 Category:

Description

The EX45000 Hardened PoE Ethernet Switch series is a PoE switch, designed to operate in the harsh environments at the edge of the network. The EX45000 functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). Whether on the factory floor or the street corner, the EX45000 will provide flawless communications when you need it most. The EX45000 is a Switch with the flexibility of eight Ethernet ports , 4 of which are PoE, that may be configured in various combinations of copper and fiber optic interfaces. Flexibility is the main feature of the EX45000, it may be DIN- Rail, Panel, or Rack mounted, and comes with Terminal Block and Power Jack power inputs to match the applications that require a tough, environmentally Hardened Ethernet Switch. Port 1 ~ port 4 on EX45000 supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE) and can detect an IEEE802.3af compliant Powered Device (PD). Using external 48VDC power inputs through Terminal Block or Power Jack, data and power can be transmitted to a Powered Device (PD) over the same twisted-pair Ethernet cable through port 1 ~ port 4 on EX45000.

FEATURES
-Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
-Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
-Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE)
-1024 MAC addresses
-1M bits buffer memory
-10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
-Full wire-speed forwarding rate
-Alarms for power and port link failure by relay output
-Redundant power inputs with Terminal Block and DC Jack
–40°C to 75°C (-40°F to 167°F) operating temperature range
-Hardened aluminum case
-Supports DIN-Rail, Panel Mounting installation

ORDERING INFORMATION
EX45080-00Z 8-port 10/100Base-TX Hardened Unmanaged PoE Ethernet Switch
EX45071-X0Z 7-port 10/100Base-TX +1-port 100Base-FX Hardened Unmanaged PoE Ethernet Switch
EX45062-X0Z 6-port 10/100Base-TX +2-port 100Base-FX Hardened Unmanaged PoE Ethernet Switch

100FX Fiber Options:
(X) = 1: Multi Mode (SC)
2: Multi Mode (ST)
A: Single Mode (SC)-20Km
B: Single Mode (SC)-40Km
H: Single Mode (ST)-20Km
P : Single Mode (SC) WDM-TX:1310nm/RX:1550nm-20Km
Q: Single Mode (SC) WDM-TX:1550nm/RX:1310nm-20Km
R: Single Mode (SC) WDM-TX:1310nm/RX:1550nm-40Km
S: Single Mode (SC) WDM-TX:1550nm/RX:1310nm-40Km

*More 100FX Fiber options also available upon request.

Power Input Interface:
(Z) = B : Terminal Block & DC Jack

Power Supply: (Optional)
*Option A – The Terminal Block type external power supply are not included. Please order the following part numbers, as required: DR-120-48
**Option B – The external power adapter and power cord are not included. Please order the following part numbers, recommend for indoor use, as required: AS-120P-48
*See page 4-5 to 4-9 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter)

Installation Type: DIN Rail (mounting kit is included)
Optional Panel mount kit, ordered separately, part number: KP-AA96-480

SPECIFICATIONS
Technology
Standards:
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX,
IEEE802.3x, IEEE802.3af
Forward and Filtering Rate:
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory:
1M bits
Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size:
1024 MAC addresses
Power
Input:
Input Voltage: 48VDC (Terminal Block; DC Jack)
Power Consumption:
72W Max. 1.5A@48VDC
Power Supply References:
Terminal Block: 48VDC, 2.5A
DC Jack: 48VDC, 2.5A
Overload Current Protection:
Present
Reverse Polarity Protection:
Present
Mechanical
Casing:
Aluminum case
IP20
Dimensions:
68mm (W) x 110mm (D) x 135mm (H)
(2.68″ (W) x 4.33″ (D) x 5.31″ (H))
Weight:
1Kg (2.2lbs.)
Installation:
DIN-Rail, Panel Mounting
Interface
Ethernet Port:
10/100Base-TX: 8, 7 or 6 ports
100Base-FX: 0, 1 or 2 ports
LED Indicators:
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX, 100FX: Link/Activity
Alarm Contact:
One relay output with current 0.1A @ 24VDC
Environment
Operating Temperature:
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Regulatory Approvals:
ISO:
Manufactured in an ISO9001 facility
Safety:
UL508, EN60950-1, IEC60950-1
EMI:
FCC Part 15, Class A
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3
EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / – 4KV; Criteria B
Air: + / – 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV; Criteria B
D.C. Power Ports: + / – 4KV; Criteria B
A.C. Power Ports: + / – 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
EN61000-4-11 (Voltage Dip Standards)
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B
Environmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
NEMA TS1/2 Environmental requirements for Traffic control
equipment

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in