Shop

Data Connect ST3342E-208-4 Low Power industrial grade modem, 2 wire dial and 2 or 4 wire leased circuits.-0

Data Connect ST3342E-208-4 Low Power industrial grade modem, 2 wire dial and 2 or 4 wire leased circuits.

$318.75

In stock

SKU: 3342E-208-4 Category:

Description

Low Power industrial grade modem, 2 wire dial and 2 or 4 wire leased circuits. Power: 12 to 300 VDC or 100 to 240 VAC – (both 60 and 50 Hz), Synchronous or Asynchronous, Hot/Cold Temperature Rated.

V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J

V.42/MNP 2-4 ERROR CORRECTION
MNP 10 EXTENDED SERVICES
V.42bis/MNP5 DATA COMPRESSION
GROUP 3 (CLASS I & 2) FAX
RS-232-C (V.24) TERMINAL INTERFACE
ASYNC & SYNC DTE SUPPORT
2-WIRE LEASED LINE OPERATION
4-WIRE LEASED LINE OPERATION
AC OR DC POWERED
LOW POWER SLEEP MODE
TEMPERATURE RATED
INDUSTRIAL CLASS MODEM

A commitment to constant improvement keeps StarComm communications products ahead of the industry in quality and performance. The models incorporate the latest advancements in modem design to deliver more performance, more features and higher reliability.

StarComm 3342E-208-4 Modem models provide a complete implementation of the ITU-T V.34 standard for 33.6Kbps operation and will operate V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J modulations.

StarComm high-speed modems offer the features required for compatibility with a wide range of industry standard systems and software.

FEATURES AND SPECIFICATIONS

COMPATIBILITY – V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J.

LINE TYPE – Unconditioned lease line, 2 or 4 wire

DTE INTERFACE – RS-232C (V.24). Female DB25, Synchronous or Asynchronous: Autobaud or selectable formats and rates to 11 5.2Kbps on 3342 models or 57.6Kbps on 1442 models.

AUTO DIAL MODES – Standard Hays AT compatible dial commands or DTR dial of stored number.

ANSWER MODES – Standard auto answer or manual answer under DTE control.

ERROR CORRECTION – V.42 and MNP 2-4 error correction. MNP 10 extended cellular services.

DATA COMPRESSION – V.42bis and MNP5 data compression.

CONFIGURATION CONTROL – Standard AT commands.

DIAGNOSTICS – V.54 through AT commands.

LINE INTERFACE:
DIAL: 2-Wire Pulse or DTMF XMT level: 12dBm RCV sensitivity: -43dBm
2-WIRE LEASED XMT level: Adjustable RCV sensitivity: -43dBm
4-WIRE LEASED XMT level: Adjustable RCV sensitivity: -43dBm
* May also be used in 2 or 4-wire short haul applications.

POWER (STAND-ALONE UNITS) – Standard units automatically adjust to 9VAC or 9-14VDC. Power supply options: 5.5-14VDC, 18-75VDC, 66-16OVDC / 115, 220, 230 and 50hz VAC.

POWER (RACK MOUNT) – Standard CC-2016 rack automatically adjusts to 85-265VAC, 27-44OHz.
Optional DC supply automatically adjusts to positive or negative 36-75VDC.

ENVIRONMENTAL – Operating temperature range: -20C to +80C. Humidity: 90% non-condensing.

APPROVALS – FCC Part 68 & Part 15, Class A. Optional: International approvals available.

PHYSICAL (STAND ALONE UNITS) -Dimensions: 5.30″Lx5.05″Wx1.53″H. Weight: 12oz.

PHYSICAL (RACK MOUNT) – Fits CC-2016 rack. 4.73″Lx4.60″Wx.80″H. Weight: 9oz.

RACKS – The CC-2016-XX Series of 16 Slot Rack Mount Enclosures
These enclosures provide 16 modem slots in a standard 19 inch form factor which is 5 inches high and 6.5 inches in depth. The standard power system auto ranges from 85 to 265VAC with a frequency range of 27 – 440hz. An optional DC supply is also available for installations requiring operation on 36 – 75VDC. All rack configurations are designed for operation from -20C to +70C and offer a mean time between failure (MTBF) of 200,000 hours (22.8) years.

BRACKET – 19 Inch Rack Mount Bracket For All Stand Alone Models

This bracket provides mounting for three 5″x 5″stand alone rnodems or two 5″ by 7″ mufti-port modems within a standard 19 inch rack.

BRACKET – 9 Inch Wall Mount Bracket For All Stand Alone Models

This wall mount bracket may be attached to all 5″ x 5″ or 5″ x 7″ stand alone models.

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in