Shop

PATTON 1000F MINI ASYNC. LINE DRIVER-0

PATTON 1000F MINI ASYNC. LINE DRIVER

$36.10

In stock

SKU: SKU - 1905 Category:

Description

The Model 1000F async short range modem plugs directly into a DB-25M RS-232 port and support distances up to 17 miles (27.4 Km) on 19 AWG at 1200 bps over two unconditioned twisted pairs. Operating at data rates up to 19.2 kbps, this cost saving device does not require AC power or batteries to operate. The Model 1000 is DCE/DTE switchable, and is compatible with the Patton Model 1009 and 1015. The Model 1000S incorporates 600 Watts per wire of built-in Silicon Avalanche Diode surge protection.
Range to 17 Miles (27.4 Km) on 19 AWG @ 1200 bps
Data Rates to 19,200 bps
No AC Power or Batteries Needed
External DCE/DTE Switch
FCC Approved-Part 15 Class A
Very Thin Case (.75/1.9cm) for Closely Spaced Computer Ports
“S” Versions Have 600 Watts per Wire of Built-in Surge Protection.
Specifications
Transmission Format: Asynchronous
Data Rate: 0 to 19,200 bps (no strapping)
Control Signal: CTS (Pin 5) turns ON immediately after the terminal raises RTS (Pin 4); DSR (Pin 6) and DCD (Pin 8) turn ON immediately after the terminal raises DTR (Pin 20)
Transmit Line: 4 wire, unconditioned line (2 twisted pair)
Transmit Mode: Full duplex, 4-wire
Transmit Level: 0 dBm
Line Connection: RJ-11 or RJ-45 jack or 5 screw terminal posts (4 wires and 1 ground) and a strain relief
Surge Protection: 600W power dissipation at up to 1 msec
Power: None required, uses ultra low power from EIA data and control signals
Dimensions: 2.20 x 1.75 x 0.75

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in