Data Connect Fiber-E3-SMSC120
$3,658.75
In stock
Description
Data Connect Fiber-E3-SMSC120
The Data Connect Fiber-T3, STM-1 Based Multi-Service Provisioning Platform is used to extend T3/E3/DS3 networks over fiber connection, features an advanced compact Add Drop Multiplexer which can transmit up to 63 E1 and/or data service such as V.35 and Ethernet via an SMT-1 ring. The optical interface complies with international telecommunication standards, such as ITU-T G.655, G.652, and G.653. By utilizing modular design for aggregate and low speed tributaries, the SDH01A can meet your network demands with a flexible combination of services at a lower cost. All pluggable modules are designed to be hot swapped without any interruptions to traffic when plugging in or out. In addition to the E1 tributaries, other data interfaces are provided for data communications such as V.35 and 10/100M Ethernet. Users can select any combination of modules according to their requirements. With its full function and multi-access capability, the Data Connect Fiber-T3 is your best choice for optical SDH networks.
Features
Connector:
1×9 (SC, FC)
Optical Interfaces
Data Rate:
155.52Mbps (STM-1)
Cable Type:
SM 9/125µm
Distance:
SM 30/60/120km, WDM 60km
Wavelength:
1310nm, 1550nm
Electrical Interface
Console:
D-type 9-pin female
SNMP, LAN:
RJ45
Alarm:
D-type 9-pin female
Frame Ground:
Screw
Standard
STM1:
ITU-T G.707, G.841, G.783, G.803, G.652
E1:
ITU-T G.703, G.704, G.706, G.732, G.823
Ethernet:
ITU.T G.7041 GFP-F, G.707 VCAT, IEEE802.3x, 802.1p, 802.1q, 802.ad, 802.1w, 802.1d
V.35:
ITU-T V.35, ITU-T G703
LEDs:
PWR, WK, FLT-fault, Alarm, ACO, RDI, LBK, Channels, Ethernet
Power:
AC: 90~264V DC24: -36 ~ -72V
Power Consumption:
<15W
Dimensions: (D x W x H) mm
312 x 440 x 44mm
Weight:
3.6K
Temperature:
0~50°C (Operating), 0~70°C (Storage)
Humidity:
10~90% non-condensing
Certification:
CE, FCC, RoHS
MTBF:
55,000 hours
Application
Ordering Information
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
