Description

The EL900 series, Fast Ethernet media converters are designed to operate in harsh environments. The EL900 functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional oparation @ -40°C to 85°C (-40°F to 185°F), Whether on the factory floor or the street corner, the EL900 will provide flawless communications when you most need it most. EL900 series are available in all types of fiber cabling and connector types. The RJ-45 port on this unit provides Auto-MDIX and auto-negotiation. The link-fault-pass-through feature allows the network management agent on adjacent equipment to react to a broken link. Flexibility is the main feature of the EL900, it may be DIN rail or panel mounted, and comes with power options to match the applications that require a tough, environmentally hardened, Fast Ethernet media converter.

FEATURES
-Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
-Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
-UL 1604 Class 1, Division 2 Classified for use inhazardous locations (Applicable to versions with Terminal Block power option)
-DIP switch configuration for “Link-Fault-Pass-Through”, link down alarm, speed, duplex mode
-2048 MAC addresses
-768K bits buffer memory
-10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
-Full wire-speed forwarding rate
-Alarms for power and port link failure by relay output
-Redundant power inputs with Terminal Block or DC Jack
–40°C to 75°C (-40°F to 167°F) operating temperature range
-Hardened aluminum case
-Supports DIN-Rail, Panel or Rack Mounting installation

ORDERING INFORMATION
EL900-X-Y-I-P 10/100Base-TX to 100Base-FX Hardened Media Converter

10/100TX Options :
(X) = A : 10/100Base-TX (for Port 1 only)

100FX Fiber Options :
B : Multi Mode (SC)
C : Multi Mode (ST)
M : Single Mode (ST) -20Km
N : Single Mode (SC) -20Km
O : Single Mode (SC) -40Km
Q : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
R : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km
S : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
T : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km

*More 100FX Fiber options with bonus Copper support.

Installation Type :
(I) = 1 : DIN Rail (mounting kit is included)
Optional Panel mount kit, ordered separately, part number: KP-AA96-480

Power Connector Options :
(P) = A : Terminal Block* / B : DC Jack**
*Options A -The Terminal Block type external power supply are not included. Please order the following part numbers, as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Options B -The external power adapter and power cord are not included. Please order the following part numbers, as required: 41-136044-X X=1,2,3,4,5

*See page 4-5 to 4-9 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter)

SPECIFICATIONS
Technology
Standards:
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x
Forward and Filtering Rate:
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory:
768K bits
Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size:
2048 MAC addresses
Latency:
Less than 128.9ìs
Power
Input:
Input Voltage: 12 to 24VDC (Terminal Block); 12VDC (DC Jack)
Power Consumption:
9.12W MAX. 0.76A @ 12VDC, 0.38A @ 24VDC, 0.19A @ 48VDC
Power Supply References:
Terminal Block: 12 to 24VDC, 1.5A
DC Jack: 12VDC, 3A
Overload Current Protection:
Present
Reverse Polarity Protection:
Present
Mechanical
Casing:
Aluminum case
IP20
Dimensions:
50mm (W) x 110mm (D) x 135mm (H)
(1.97″ (W) x 4.33″ (D) x 5.31″ (H))
Weight:
0.8Kg (1.76lbs.)
Installation:
DIN-Rail, Panel, Rack Mounting
Interface
Ethernet Port:
10/100Base-TX: 1 port
100Base-FX: 1 port
LED Indicators:
Per Unit: Power Status (Power 1, Power 2, Fault),
Link-Fault-Pass-Through
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision, Speed
100FX: Link/Activity, Full-duplex/Collision
Alarm Contact:
One relay output with current 1A @ 24VDC
Environment
Operating Temperature:
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Regulatory Approvals:
ISO:
Manufactured in an ISO9001 facility
Safety:
Hazardous locations: Class 1, Division 2 group A,B,C&D
UL60950-1, EN60950-1, IEC60950-1
EMI:
FCC Part 15, Class A
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3
EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / – 4KV; Criteria B
Air: + / – 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV; Criteria B
D.C. Power Ports: + / – 4KV; Criteria B
A.C. Power Ports: + / – 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
EN61000-4-11 (Voltage Dip Standards)
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B
Environmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
NEMA TS1/2 Environmental requirements for Traffic control equipment