Description

Overview

The Patton CopperLink Ethernet Extender offers one of the most efficient, reliable, and cost-effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services—all at 12.5 Mbps! The Patton Model 2150 offers premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.

CopperLink Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the twisted-pair telephone wire to the CopperLink RJ-45F jack or terminal block, the external power supplies to the units and an appropriate power source, and you’re ready to operate. The CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. No configuration is required!

Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton’s CopperLink Ethernet Extender is one of the most simple and cost effective solutions around!

Ethernet Extension Application
Used in pairs, the Model 2150 establishes a high-speed 12.5 Mbps communication link inter-connecting two geographically separated LANs. Operation is simple: packets destined for the remote LAN are sent transparently, at full line rate, to the peered LAN. The Patton Model 2150 can also be used to reach remote PCs and other equipment and for delivering last mile ISP services.

Back-to-Back Extension Application
Use the Patton Model 2150 units in a back-to-back configuration, using an Ethernet crossover cable, to double the length of your high-speed Ethernet connection!

Features & Benefits
High-speed full-duplex 12.5 Mbps communications link
Extends Ethernet connections up to 4,500 ft. (1,372 m)
Easy 2-wire CopperLink connection via built-in RJ-45 or 2-position terminal block
Passes higher layer protocols and supports 802.1Q (VLAN tagging)
Automatic learning and aging address table
Five LEDs monitor power, CopperLink link and status, Ethernet link and activity
Auto-sensing 10 or 100Base-T and full or half-duplex Ethernet operation
No configuration required!

Specifications

CopperLink Interface: RJ-45 (pin 4=TIP; pin 5=RING) and two-position terminal block (supports 19–26 AWG)
Ethernet Interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation
Protocol: Transparent to high layer protocols. Supports 802.1Q VLAN tagging
Transmission: CopperLink line rate: 12.5 Mbps; Data rate: 10 Mbps full-duplex
Surge Supression: CopperLink maximum current surge: 20kA (8/20_s) gas tube
Front Panel Indicators: Power, CopperLink Link and Error, Ethernet Link and Activity status.
External Power Supply Options:
• AC: 120 VAC and Universal Power Supply (100–240 VAC)
• DC: -48 VDC, -24 VDC, and -12 VDC (optional upon request)
Compliance: FCC Part 15 Class A; EMC Directive 89/336/EEC, Low
Voltage Directive 73/23/EEC; CE Mark
Temperature: 32 to 122°F (0 to 50°C)
Altitude: 0–15,000 ft (4,572 m)
Humidity: Up to 90% non-condensing
Dimensions:
• Standalone: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
• Rack card: 3.0 H x 0.83 W x 7.84 D in. (7.6 H x 2.1 W x 19.9 D cm)
Weight:
• Standalone: 0.4 lbs (0.18 kg) without power supply
• Rack card: 0.3 lbs (0.14 kg)